Chapter 50 System

Hang Up check box is selected, the ZyWALL uses this hardware signal to force the WAN device to hang up, in addition to issuing the drop command ATH.

Response Strings

The response strings tell the ZyWALL the tags, or labels, immediately preceding the various call parameters sent from the serial modem. The response strings have not been standardized; please consult the documentation of your serial modem to find the correct tags.

50.11.1 Configuring Dial-in Mgmt

Click Configuration > System > Dial-in Mgmt to display the following screen. Configure this screen for dial-in management connections.

Figure 550 Configuration > System > Dial-in Mgmt

The following table describes the labels in this screen.

Table 240 Configuration > System > Dial-in Mgmt

LABEL

DESCRIPTION

Show Advance

Click this button to display a greater or lesser number of configuration

Settings / Hide

fields.

Advance Settings

 

 

 

Dial-in Server

Click Advanced to display more configuration fields and edit the

Properties

details of your dial-in management setup. Click Basic to display fewer

 

fields.

 

 

Enable

Select this check box to turn on dial-in management.

 

 

Description

Enter some information about this connection.

 

 

Mute

Select this check box to stop the external serial modem from making

 

audible sounds during a dial-in management session.

 

 

Answer Rings

Set how many times the ZyWALL lets the incoming dial-in

 

management session ring before processing it.

 

 

828

 

ZyWALL USG 2000 User’s Guide