Chapter 7 Tutorials

You do not have to change many of the ZyWALL’s settings from the defaults to set up this trunk. You only have to set up the outgoing bandwidth on each of the WAN interfaces and configure the WAN_TRUNK trunk’s load balancing settings.

7.3.1 Set Up Available Bandwidth on Ethernet Interfaces

Here is how to set a limit on how much traffic the ZyWALL tries to send out through each WAN interface.

1Click Configuration > Network > Interface > Ethernet and double-click the ge2 entry. Enter the available bandwidth (1000 kbps) in the Egress Bandwidth field. Click OK.

Figure 76 Configuration > Network > Interface > Ethernet > Edit (ge2)

2Repeat the process to set the egress bandwidth for ge3 to (512 Kbps).

 

125

ZyWALL USG 2000 User’s Guide