Chapter 17 Zones

17.3 Zone Edit

The Zone Edit screen allows you to add or edit a zone. To access this screen, go to the Zone screen (see Section 17.2 on page 379), and click the Add icon or an Edit icon.

Figure 287 Network > Zone > Add

The following table describes the labels in this screen.

Table 93 Network > Zone > Edit

LABEL

DESCRIPTION

Name

For a system default zone, the name is read only.

 

For a user-configured zone, type the name used to refer to the zone. You

 

may use 1-31 alphanumeric characters, underscores(_), or dashes (-),

 

but the first character cannot be a number. This value is case-sensitive.

 

 

Block Intra-

Select this check box to block network traffic between members in the

zone Traffic

zone.

 

 

Member List

Available lists the interfaces and VPN tunnels that do not belong to any

 

zone. Select the interfaces and VPN tunnels that you want to add to the

 

zone you are editing, and click the right arrow button to add them.

 

Member lists the interfaces and VPN tunnels that belong to the zone.

 

Select any interfaces that you want to remove from the zone, and click

 

the left arrow button to remove them.

 

 

OK

Click OK to save your customized settings and exit this screen.

 

 

Cancel

Click Cancel to exit this screen without saving.

 

 

380

 

ZyWALL USG 2000 User’s Guide