ZyXEL Communications USG 2000 manual 933

	Appendix A Log Descriptions
Table 277 Built-in Services Logs (continued)
LOG MESSAGE	DESCRIPTION
Console baud has been	An administrator changed the console port baud rate back to
reset to %d.	the default (115200).
	%d is default baud rate
DHCP Server on	If interface is stand-by mode for device HA, DHCP server can't
Interface %s will not	be run. Otherwise it has conflict with the interface in master
work due to Device HA	mode.
status is Stand-By	%s is interface name
DHCP Server on	When an interface has become the HA master, the DHCP
Interface %s will be	server needs to start operating.
reapplied due to	%s is interface name
Device HA status is
Active
DHCP's DNS option:%s	DHCP pool's DNS option support from WAN interface. If this
has changed.	interface is unlink/disconnect or link/connect, this log will be
	shown.
	%s is interface name. The DNS option of DHCP pool has
	retrieved from it
Set timezone to %s.	An administrator changed the time zone.
	%s is time zone value
Set timezone to	An administrator changed the time zone back to the default
default.	(0).
Enable daylight	An administrator turned on daylight saving.
saving.
Disable daylight	An administrator turned off daylight saving.
saving.
DNS access control	An administrator tried to add more than the maximum
rules have been	number of DNS access control rules (64).
reached the maximum
number.
DNS access control	An administrator added a new rule.
rule %u of DNS has	%u is rule number
been appended.
DNS access control	An administrator inserted a new rule.
rule %u has been	%u is rule number
inserted.
DNS access control	An administrator appended a new rule.
rule %u has been	%u is rule number
appended
DNS access control	An administrator modified the rule %u.
rule %u has been	%u is rule number
modified
DNS access control	An administrator removed the rule %u.
rule %u has been	%u is rule number
deleted.

	933
ZyWALL USG 2000 User’s Guide