Chapter 1 Introducing the ZyWALL

1.3.2 Maximizing Throughput

The ZyWALL has one internal bus for ports P1-P7and another for port P8. To maximize the ZyWALL’s throughput, use P8 for your connection with the most traffic.

Figure 10 Gigabit Interfaces and Internal Buses

The ZyWALL has a slot for adding an optional Security Extension Module (SEM) to enhance the ZyWALL’s VPN and /or Unified Threat Management (UTM) capabilities.

Figure 11 SEM

The VPN module (SEM-VPN) increases the maximum VPN throughput from 100 Mbps to 500 Mbps, the maximum number of IPSec VPN tunnels from 1,000 to 2,000 and the maximum number of SSL VPN users from 250 (with a license) to 750 (with a license).

The UTM module (SEM-UTM) increases the maximum anti-virus and IDP traffic throughput from 100 Mbps to 400 Mbps.

The SEM-DUAL module provides the performance enhancements of both the VPN and UTM modules.

1.3.3Front Panel LEDs

The following table describes the LEDs.

Table 1 Front Panel LEDs

LED

COLOR

STATUS

DESCRIPTION

PWR1, PWR2

 

Off

Both power modules are turned off, not receiving

 

 

 

power, or not functioning.

 

 

 

 

 

Green

On

The power module is operating.

 

 

 

 

 

Red

On

The power module has malfunctioned. Turn the

 

 

 

power module off, wait a few minutes, and turn the

 

 

 

power module back on (see Section 1.5 on page 41).

 

 

 

If the LED shines red again, then please contact your

 

 

 

vendor.

 

 

 

 

 

39

ZyWALL USG 2000 User’s Guide