ZyXEL Communications USG 2000 6.2.2 Default Interface and Zone Configuration

Chapter 6 Configuration Basics

6.2.2 Default Interface and Zone Configuration

This section introduces the ZyWALL’s default zone member physical interfaces and the default configuration of those interfaces. The following figure uses letters to denote public IP addresses or part of a private IP address.

Figure 63 Default Network Topology

Table 13 Default Port, Interface, and Zone Configuration

PORT	INTERFACE	ZONE	IP ADDRESS AND DHCP	SUGGESTED USE WITH
			SETTINGS	DEFAULT SETTINGS
P1	ge1	LAN	192.168.1.1, DHCP server	Protected LAN
			enabled
P2, P3	ge2, ge3	WAN	DHCP clients	Connections to the Internet
P4~P6	ge4, ge5,	DMZ	192.168.2.1,	Public servers (such as web,
	ge6		192.168.3.1,	e-mail and FTP)
			192.168.4.1, DHCP server
			disabled
P7, P8	ge7, ge8	None	None, DHCP server	Configure and use these
			disabled	interfaces according to your
				requirements. Add them to
				existing zones or create new
				zones for them.
AUX	aux	None	None	Auxiliary modem
CONSOLE	N/A	None	None	Local management

•The LAN zone contains the ge1 interface. The LAN zone is a protected zone. The ge1 interface uses 192.168.1.1.

•The WAN zone contains the ge2 and ge3 interfaces (physical ports 2 and 3). They use public IP addresses to connect to the Internet.

98
	ZyWALL USG 2000 User’s Guide