Remington Power Tools ST3812B, ST4514B owner manual Attaching Adjustable Front Handle

REMINGTON® ELECTRIC TRIMMER/EDGER 5

Attaching Adjustable Front Handle

1.Remove the knob and bolt from front handle (see Figure 3-6).

2.Place the handle on the trimmer/ edger shaft between the rear handle and the telescope release button. Snap handle onto shaft (see Figure 3-7).

3.Insert bolt back into the front handle (see Figure 3-8).

4.Loosely screw knob onto bolt (see Figure 3-9).

5.Adjust handle to the most comfort- able position and tighten the knob firmly. Do not overtighten the knob.

Figure 3-6: Removing knob and bolt from handle

Figure 3-8: Inserting bolt into handle

Figure 3-7: Placing handle onto shaft

Figure 3-9: Screwing knob onto bolt

118035