Hitachi 42HDW10 Other Features, Automatic Store, Display Registration Reproduction Condition

ENGLISH

OTHER FEATURES

Automatic Store

■Approximately 1 sec. after adjustment is completed, the adjustments will be recorded as shown in the table below.

Item	Display	Registration	Reproduction
		condition	condition
Sound volume	VOLUME
Sound balance	BALANCE
Treble	TREBLE
Bass	BASS
Mute volume	MUTE LEVEL
Input status automatic	AUTO FREQ.	One set can be recorded.	During normal signal
display			reception.
Line correction	LINE INTP.
Three-dimensional Y/C	3D COMB
separation
HD signal	COMPONENT
Language selection	LANGUAGE
		One set can be recorded
Contrast	CONTRAST	during common RGB1,
Brightness	BRIGHTNESS	RGB2 input; one set of	During normal signal
Color temperature	COLOR SELECT	two can be recorded
			reception.
Gamma correction	GAMMA	during normal signal
Input signal level	VIDEO LEVEL	reception with common
		VIDEO 1, VIDEO 2 input.
Color	COLOR	One set can be recorded
Tint	TINT		During normal signal
		during common VIDEO 1,
Sharpness	SHARPNESS		reception.
Video enhance	VIDEO ENHANCE	VIDEO 2 input.
Display area	DISPLAY AREA
Display size	DISPLAY SIZE
Horizonal position	H.POSITION	One group can be	During recording and when
Vertical position	V.POSITION	recorded for each signal	the same signal mode is
Dot clock frequency	CLOCK	mode.	detected.
Dot clock phase	PHASE
Verical size	V. SIZE

•The previously recorded items will be lost.

•The signal mode can be identified by the horizontal/vertical sync frequency and the sync signal polarity. Different signals with which all the elements are the same or similar will be handled as the same signal.

•RGB1 and RGB2 inputs have common elements that can be recorded for each signal mode. Because of this, when the contents are recorded with RGB1 (or RGB2), there may be loss of adjustment during RGB2 (or RGB1) reception in the same signal mode.

20