Bay Technical Associates DS62-MD4, DS Series manual Login Setup Menu, Access Control, Manage Users

Page 21

DS62-Network, DS62-MD4 Network/Modem Host Module

Port ID Echo is	Disabled
Disable Port ID Echo	1
Use Module, Port Number	2
Use Device Name	3
Exit	X,CR
Enter Request :

Login Setup Menu

This menu allows the admin user to enable or disable the Access Control, Manage Users, Direct Port Connection, Radius, and TACACS configuration. Depending on what firmware the Host Module has, the Login Setup menu may be different than what is shown in this figure, but are defined below.

Access Control	1	Telnet/Serial Enable/Disable Login prompt
Manage Users	2	Change user password or port access,
Direct Port Connection	3	add/delete user,
Direct Port Connection	3	Enable/Disable
Radius Configuration	4	See below for Radius menu
TACACS Configuration	5	See below for TACACS menu
Exit	X,CR

Enter Request :

Access Control

This security feature allows the admin to enable or disable usernames and passwords for both network and serial port access.

Telnet Login Prompt Enable/Disable..1

Serial Login Prompt Enable/Disable..2

Modem Login Prompt Enable/Disable...3

Enter Request :

If either login has been enabled you will get a prompt similar to the following:

Coldfire login: root or Universal DS login: root

Password:Password:

The default user and password is “root/baytech”, all lower case.

Manage Users

This menu allows the administrator to add/delete users and change their passwords for multiple users. Up to 19 users plus an administrator allowed. Usernames and passwords are case sensitive and alphanumeric. The root user can not be removed. Select Manage User and the DS displays the following:

21

Image 21

Contents DS Series Manual DS62-Network, DS62-MD4 Network/Modem Host Module EIA-232 Serial Connection DS62-Network, DS62-MD4 Network/Modem Host Module DS62-Network, DS62-MD4 Network/Modem Host Module Installation Connection DescriptionInternal Modem Connection Quick Start Host Module PowerSerial Setup DS-DS Access Control Login Setup MenuRadius Configuration Network Port ConfigurationAdapters Signals Description DS62 EIA-232 RJ-45 Signal Pin DirectionSignal RS-232 COM Port Port DS Port RPC DE-9 Pin DB-25 Pin CablingAdapters Main Screen Detail Operations and ConfigurationsConfiguration Status Unit Configuration MenuDTR RTS Serial Port Configuration Default is NoneHandshaking Word Size Baud RateDS62-Network, DS62-MD4 Network/Modem Host Module Stop Bits ParityRTS/DTR Line Driver Inactivity State Serial Port Device Name Default setting is DisabledDisconnect Timeguard Connect Port ID EchoLogin Setup Menu Access ControlManage Users ADD User Change User’s Port Access and PasswordSelect a non-root user and the DS displays Radius Configuration Direct Port ConnectionDelete User Tacacs Configuration Tacacs Network Port Configuration Subnet Mask IP AddressGateway Address Inactivity TimeoutCarriage Return Translation Break LengthSSH Host Key Generation IP Filter ConfigurationSelect F, Flush Rules to delete all rules. The DS displays Snmp Configuration Read/Write Community String Default is Disabled Web Server ConfigurationDefault is Enabled Default is zero minutesInternal Alarm Threshold Module NameDS Management Select 1, the DS displays External Alarm ThresholdOutlet Groups Select 6, Delete All Outlet Groups and the DS displays Enable Firmware Upgrade Firmware / Config DownloadEnable Configuration File Upload Get Current Configuration File Restore Configuration DefaultsDisplay Configuration Error Log DS62-MD4 Modem Configuration MenuModem Host V90 Modem 9600 None None LO LO Modem Device Name Status Menu Overall System StatusNetwork Status Logged Users Memory UsageCurrent Routing Cache Processes Route SetupUnit Reset LogoutUnitInfo Database Functional Solutions TroubleshootingDS62/DS62-MD4 DS62 and DS62-MD4 Reset procedureExceptions BayTech Product WarrantyEmail support@baytech.net Technical SupportReturn Authorization Process