Bay Technical Associates DS62-MD4, DS Series Status Menu, Overall System Status, Network Status

Page 45

DS62-Network, DS62-MD4 Network/Modem Host Module

Modem Device Name: Host V90 Modem

Enter Device Name (<= 16 characters):

Caution: Once you make a change to any of the Configuration options, you have to back out of the Configuration menu and will be asked to Accept changes.

Accept changes ? (Y/N) :y

Changes accepted.

Status Menu
DS62 Status Menu.
Enter selection, CR to exit.
Overall System Status	1
Network Status	2
Logged Users	3
Memory Usage	4
Current Routing Cache	5
Route Setup	6
Processes	7
UnitInfo Database	8

Overall System Status

System Status provides information about the local memory, how many TCP sockets are in use, and the time the unit has been operating since the last unit reset or power up.

System Status:		local memory:	7598080
Available
TCP	sockets in use:		0
System up		time (dd:hh:mm:ss): 0:00:50:10
Press	ENTER	to continue

Network Status

Network Status contains the MAC address, IP address, Mask, TX/RX packets and their status.

45

Image 45

Contents DS Series Manual DS62-Network, DS62-MD4 Network/Modem Host Module EIA-232 Serial Connection DS62-Network, DS62-MD4 Network/Modem Host Module DS62-Network, DS62-MD4 Network/Modem Host Module Installation Connection DescriptionInternal Modem Connection Quick Start Host Module PowerSerial Setup DS-DS Access Control Login Setup MenuRadius Configuration Network Port ConfigurationAdapters Signals Description DS62 EIA-232 RJ-45 Signal Pin DirectionSignal RS-232 COM Port Port DS Port RPC DE-9 Pin DB-25 Pin CablingAdapters Main Screen Detail Operations and ConfigurationsConfiguration Status Unit Configuration MenuDTR RTS Serial Port Configuration Default is NoneHandshaking Word Size Baud RateDS62-Network, DS62-MD4 Network/Modem Host Module Stop Bits ParityRTS/DTR Line Driver Inactivity State Serial Port Device Name Default setting is DisabledDisconnect Timeguard Connect Port ID EchoLogin Setup Menu Access ControlManage Users ADD User Change User’s Port Access and PasswordSelect a non-root user and the DS displays Radius Configuration Direct Port ConnectionDelete User Tacacs Configuration Tacacs Network Port Configuration Subnet Mask IP AddressGateway Address Inactivity TimeoutCarriage Return Translation Break LengthSSH Host Key Generation IP Filter ConfigurationSelect F, Flush Rules to delete all rules. The DS displays Snmp Configuration Read/Write Community String Default is Disabled Web Server ConfigurationDefault is Enabled Default is zero minutesInternal Alarm Threshold Module NameDS Management Select 1, the DS displays External Alarm ThresholdOutlet Groups Select 6, Delete All Outlet Groups and the DS displays Enable Firmware Upgrade Firmware / Config DownloadEnable Configuration File Upload Get Current Configuration File Restore Configuration DefaultsDisplay Configuration Error Log DS62-MD4 Modem Configuration MenuModem Host V90 Modem 9600 None None LO LO Modem Device Name Status Menu Overall System StatusNetwork Status Logged Users Memory UsageCurrent Routing Cache Processes Route SetupUnit Reset LogoutUnitInfo Database Functional Solutions TroubleshootingDS62/DS62-MD4 DS62 and DS62-MD4 Reset procedureExceptions BayTech Product WarrantyEmail support@baytech.net Technical SupportReturn Authorization Process