DS62-Network, DS62-MD4 Network/Modem Host Module
Filter Management Menu
Enter request or CR,X to exit menu.
A)...Add Rule
E)...Enable IP Filtering
D)...Delete Rule
V)...View Rules
F)...Flush Rules
C)...Set Default Target
Enter Request :
Select A) to add a rule. Type an IP address, select whether to drop or accept the address. The DS will display the following:
Please enter a single ip address filter
or an ip address block in ip/<blockmask> notation.
: 70.150.140.95 |
| |
Select | a target option for this filter: | |
DROP | the packet | 1 |
ACCEPT the packet | 2 | |
Exit | ............................. | X,CR |
Enter Request : |
|
Selecting either DROP or ACCEPT the packets and the DS will assign filter the next rule number:
Filter added as Rule 1.
Selecting E), Enable IP Filtering will enable or disable the filtering function. The DS displays:
IP Filtering is ENABLED. Enable? (Y/N): y
Select V), View Rules allows the user to see any IP filtering. Note: At least one rule must be defined for this option to be available. The DS displays:
Rule Num | Ip Address | Target |
1 | 70.150.140.95 | DROP |
2 | 70.150.140.96 | ACCEPT |
Select C), Set Default Target for ALL IP Addresses to accept or drop all. The DS displays:
The default target is............ACCEPT
DROP ? (Y/N), CR for no change) :y
Select F), Flush Rules to delete all rules. The DS displays:
31