Bay Technical Associates DS Series, DS62-MD4 Network Port Configuration, Radius Configuration

Page 11

DS62-Network, DS62-MD4 Network/Modem Host Module

Radius Configuration

Radius is used to authenticate logins for the serial and the network ports if passwords and user names are enabled on the DS. If the Radius server rejects either the username or password or does not respond, the DS will display “Invalid Password”.

TACACS Configuration

TACACS can be used to authenticate logins for the serial port, the network port, and modem. When a telnet / SSH session (or rs232 session) is started the Host module will prompt for the username and password. The Host will communicate with the TACACS server. If the server verifies the username and password, the Host will display the menus. If the server rejects the username and password or does not respond the Host will display the reason why the login failed.

Network Port Configuration

IMPORTANT: For network access, enable Telnet and configure the IP addresses, Subnet Mask, and Gateway Address, or enable the DHCP. The module must be reset for network changes to take effect.

Figure 5

Network setup :	00:C0:48:00:01:FD
Ethernet Address	00:C0:48:00:01:FD
IP Address		70.150.140.89
Subnet Mask		255.255.255.224
Default Gateway		70.150.140.65
Connection Inactivity Timeout (mins): Disabled
Carriage Return Translation: Enabled
Break Length (msecs): 350		SSH is Enabled
DHCP is Disabled Telnet is Enabled		SSH is Enabled
SSH host keys are set to factory default
IP Address	1
Subnet Mask	2
Gateway Address	3
Inactivity Timeout	4
Carriage Return Translation	5
Break Length	6
DHCP Enable/Disable	7
Telnet Enable/Disable	8
SSH Enable/Disable	9
SSH Host Key Generation	10
IP Filter Configuration	11
SNMP Configuration	12
Web Server Configuration	13
Exit	X,CR
Enter Request :

11

Image 11

Contents DS Series Manual DS62-Network, DS62-MD4 Network/Modem Host Module EIA-232 Serial Connection DS62-Network, DS62-MD4 Network/Modem Host Module DS62-Network, DS62-MD4 Network/Modem Host Module Internal Modem Connection InstallationConnection Description Quick Start Host Module PowerSerial Setup DS-DS Access Control Login Setup MenuRadius Configuration Network Port ConfigurationCabling DS62 EIA-232 RJ-45 Signal Pin DirectionAdapters Signals Description Signal RS-232 COM Port Port DS Port RPC DE-9 Pin DB-25 PinAdapters Main Screen Detail Operations and ConfigurationsConfiguration Status Unit Configuration MenuDTR RTS Handshaking Serial Port ConfigurationDefault is None Word Size Baud RateRTS/DTR Line Driver Inactivity State DS62-Network, DS62-MD4 Network/Modem Host Module Stop BitsParity Connect Port ID Echo Default setting is DisabledSerial Port Device Name Disconnect TimeguardManage Users Login Setup MenuAccess Control ADD User Change User’s Port Access and PasswordSelect a non-root user and the DS displays Delete User Radius ConfigurationDirect Port Connection Tacacs Configuration Tacacs Network Port Configuration Subnet Mask IP AddressBreak Length Inactivity TimeoutGateway Address Carriage Return TranslationSSH Host Key Generation IP Filter ConfigurationSelect F, Flush Rules to delete all rules. The DS displays Snmp Configuration Read/Write Community String Default is zero minutes Web Server ConfigurationDefault is Disabled Default is EnabledDS Management Internal Alarm ThresholdModule Name Select 1, the DS displays External Alarm ThresholdOutlet Groups Select 6, Delete All Outlet Groups and the DS displays Enable Firmware Upgrade Firmware / Config DownloadEnable Configuration File Upload Get Current Configuration File Restore Configuration DefaultsDisplay Configuration Error Log DS62-MD4 Modem Configuration MenuModem Host V90 Modem 9600 None None LO LO Modem Device Name Network Status Status MenuOverall System Status Current Routing Cache Logged UsersMemory Usage Processes Route SetupUnitInfo Database Unit ResetLogout Functional Solutions TroubleshootingDS62/DS62-MD4 DS62 and DS62-MD4 Reset procedureExceptions BayTech Product WarrantyEmail support@baytech.net Technical SupportReturn Authorization Process