Bay Technical Associates DS Series Restore Configuration Defaults, Get Current Configuration File

Page 41

DS62-Network, DS62-MD4 Network/Modem Host Module

***error in config upload file or transfer operation***

NOTE: This part of the program is derived from the DS62 module program, thus the DS62 reference.

Restore Configuration Defaults

This option allows the admin to restore the DS configuration to factory defaults.

NOTE: The network default IP Address, Subnet, and Gateway is 0.0.0.0

Select Restore Configuration Defaults and the DS displays the following:

ENABLING THIS WILL ERASE ALL CONFIGURATION BACK TO FACTORY

DEFAULTS AND RESET THE UNIT

Set Configuration to Factory Defaults? (Y/N)

A YES response and the DS will display:

SETTING DEFAULT CONFIGURATION set default password file

USING DEFAULT SSL CERTIFICATE

System reset in progress...

This board is a Universal DS Controller

..........Uncompressing...done.

Get Current Configuration File

This option allows the admin to get a copy of the current DS configuration file from the unit and FTP’s it to your computer. The configuration file to be uploaded is named “confupload”. The file maybe opened with any text file editor.

NOTE: Save a copy of the “confupload” file under a different name, just in case a mistake is made that prevents the unit from operating properly. If the unit appears to not respond, power- cycle the unit and type semi-colon five times. If it appears the unit is still not responding, follow the reset procedures to reset the module.

Select Get Current Configuration File and the DS displays:

Enabling this will allow the system configuration file to be retrieved via ftp

Enable Configuration File Retrieval? (Y/N)

A YES response and the DS will display the following:

41

Image 41

Contents DS Series Manual DS62-Network, DS62-MD4 Network/Modem Host Module EIA-232 Serial Connection DS62-Network, DS62-MD4 Network/Modem Host Module DS62-Network, DS62-MD4 Network/Modem Host Module Internal Modem Connection InstallationConnection Description Quick Start Host Module PowerSerial Setup DS-DS Access Control Login Setup MenuRadius Configuration Network Port ConfigurationAdapters Signals Description DS62 EIA-232 RJ-45 Signal Pin DirectionSignal RS-232 COM Port Port DS Port RPC DE-9 Pin DB-25 Pin CablingAdapters Main Screen Detail Operations and ConfigurationsConfiguration Status Unit Configuration MenuDTR RTS Handshaking Serial Port ConfigurationDefault is None Word Size Baud RateRTS/DTR Line Driver Inactivity State DS62-Network, DS62-MD4 Network/Modem Host Module Stop BitsParity Serial Port Device Name Default setting is DisabledDisconnect Timeguard Connect Port ID EchoManage Users Login Setup MenuAccess Control ADD User Change User’s Port Access and PasswordSelect a non-root user and the DS displays Delete User Radius ConfigurationDirect Port Connection Tacacs Configuration Tacacs Network Port Configuration Subnet Mask IP AddressGateway Address Inactivity TimeoutCarriage Return Translation Break LengthSSH Host Key Generation IP Filter ConfigurationSelect F, Flush Rules to delete all rules. The DS displays Snmp Configuration Read/Write Community String Default is Disabled Web Server ConfigurationDefault is Enabled Default is zero minutesDS Management Internal Alarm ThresholdModule Name Select 1, the DS displays External Alarm ThresholdOutlet Groups Select 6, Delete All Outlet Groups and the DS displays Enable Firmware Upgrade Firmware / Config DownloadEnable Configuration File Upload Get Current Configuration File Restore Configuration DefaultsDisplay Configuration Error Log DS62-MD4 Modem Configuration MenuModem Host V90 Modem 9600 None None LO LO Modem Device Name Network Status Status MenuOverall System Status Current Routing Cache Logged UsersMemory Usage Processes Route SetupUnitInfo Database Unit ResetLogout Functional Solutions TroubleshootingDS62/DS62-MD4 DS62 and DS62-MD4 Reset procedureExceptions BayTech Product WarrantyEmail support@baytech.net Technical SupportReturn Authorization Process