Bay Technical Associates DS62-MD4, DS Series manual Read/Write Community String

Page 33

DS62-Network, DS62-MD4 Network/Modem Host Module

Accept changes ? (Y/N) :

The SNMP Trap Host is a trap management station that receives and processes traps. Traps are system alerts that the Baytech device generates when certain events occur. By default, no trap manager is defined, and no traps are issued. Up to four SNMP Trap Hosts maybe assigned to receive traps. Select a “SNMP Trap Host”, the DS will display the following, Default address is (0.0.0.0) for all Hosts.

SNMP Trap Host 1 IP Address: 220.225.36.212

Enter new Trap Host IP Address:

SNMP Trap Host 2 IP Address: 70.154.96.10

Enter new Trap Host IP Address:

SNMP Trap Host 3 IP Address: 192.168.1.102

Enter new Trap Host IP Address:

SNMP Trap Host 4 IP Address: 192.168.2.136

Enter new Trap Host IP Address:

Read/Write Community String:

Community String:

SNMP community strings authenticate access to MIB objects and function as embedded passwords. In order for your SNMP script/software to access the Baytech SNMP, the community string definitions on your SNMP script/software must match the Baytech SNMP string definitions.

Read’—Gives read access to authorized management stations to all objects in the MIB except the community strings, but does not allow write access.

Write’—Gives read and write access to authorized management stations to all objects in the MIB, but does not allow access to the community strings

Select ‘SNMP Read Only Community’ option to enter a Read Community string, the DS displays the current setting, Default is public.

SNMP Read Community name: public

Enter Read Community Name:

Select ‘SNMP Read-Write Community’ option to enter a Write Community string, the DS displays the current setting, Default is private.

SNMP Write Community name: private

Enter Write Community Name:

Select the ‘SNMP Enable’ option to enable the SNMP function, the DS displays, Default is Enabled.

SNMP is ENABLED. Enable? (Y/N):

33

Image 33
Contents DS Series Manual DS62-Network, DS62-MD4 Network/Modem Host Module EIA-232 Serial Connection DS62-Network, DS62-MD4 Network/Modem Host Module DS62-Network, DS62-MD4 Network/Modem Host Module Installation Connection DescriptionInternal Modem Connection Quick Start Host Module PowerSerial Setup DS-DS Access Control Login Setup MenuRadius Configuration Network Port ConfigurationAdapters Signals Description DS62 EIA-232 RJ-45 Signal Pin DirectionSignal RS-232 COM Port Port DS Port RPC DE-9 Pin DB-25 Pin CablingAdapters Main Screen Detail Operations and ConfigurationsConfiguration Status Unit Configuration MenuDTR RTS Serial Port Configuration Default is NoneHandshaking Word Size Baud RateDS62-Network, DS62-MD4 Network/Modem Host Module Stop Bits ParityRTS/DTR Line Driver Inactivity State Serial Port Device Name Default setting is DisabledDisconnect Timeguard Connect Port ID EchoLogin Setup Menu Access ControlManage Users ADD User Change User’s Port Access and PasswordSelect a non-root user and the DS displays Radius Configuration Direct Port ConnectionDelete User Tacacs Configuration Tacacs Network Port Configuration Subnet Mask IP AddressGateway Address Inactivity TimeoutCarriage Return Translation Break LengthSSH Host Key Generation IP Filter ConfigurationSelect F, Flush Rules to delete all rules. The DS displays Snmp Configuration Read/Write Community String Default is Disabled Web Server ConfigurationDefault is Enabled Default is zero minutesInternal Alarm Threshold Module NameDS Management Select 1, the DS displays External Alarm ThresholdOutlet Groups Select 6, Delete All Outlet Groups and the DS displays Enable Firmware Upgrade Firmware / Config DownloadEnable Configuration File Upload Get Current Configuration File Restore Configuration DefaultsDisplay Configuration Error Log DS62-MD4 Modem Configuration MenuModem Host V90 Modem 9600 None None LO LO Modem Device Name Status Menu Overall System StatusNetwork Status Logged Users Memory UsageCurrent Routing Cache Processes Route SetupUnit Reset LogoutUnitInfo Database Functional Solutions TroubleshootingDS62/DS62-MD4 DS62 and DS62-MD4 Reset procedureExceptions BayTech Product WarrantyEmail support@baytech.net Technical SupportReturn Authorization Process