Bay Technical Associates DS62-MD4, DS Series manual Modem Host V90 Modem 9600 None None LO LO

Page 43

DS62-Network, DS62-MD4 Network/Modem Host Module

+	----+	------+-----------------	Device	+------	+------	+------	------+	+---------	+----	+----	+
PortDevice			Device	Baud	Word	Stop	ParityHandshakeLineDrive
		Type	Name	Rate	Size	Bits			DTR	RTS
+	----+	------+-----------------		+------	+------	+------	+------	+---------	+----	+----	+
	2	MODEM Host V90 Modem		9600	8	1	None None		LO LO
+	----+	------+-----------------		+------	+------	+------	+------	+---------	+----	+----	+
	Handshaking			1
	Baud	Rate		2
	Word	Size		3
	Stop	Bits		4
	Parity			5
	Enter Request :

Select “Handshaking” and the DS displays with the following:

Default is None

Select handshaking: 1 For None

2 For Software Handshaking

3 For Hardware Handshaking Enter Request :

Select “Baud Rate” to change the rate the modem transfers Data bites per second, the DS displays the following: Default is 9600

Select baud rate: 1 For 300

2 For 600

3 For 1200

4 For 2400

5 For 4800

6 For 9600

7 For 19200

8 For 38400

9 For 57.6K

A For 115.2K Enter Request :

Select “Word Size” and the DS displays the following: Default is 8

Select word size: 1 For 7

2 For 8 Enter Request :

Select “Stop Bits” the DS displays the following: Default is 1.

43

Image 43

Contents DS Series Manual DS62-Network, DS62-MD4 Network/Modem Host Module EIA-232 Serial Connection DS62-Network, DS62-MD4 Network/Modem Host Module DS62-Network, DS62-MD4 Network/Modem Host Module Connection Description InstallationInternal Modem Connection Quick Start Host Module PowerSerial Setup DS-DS Access Control Login Setup MenuRadius Configuration Network Port ConfigurationCabling DS62 EIA-232 RJ-45 Signal Pin DirectionAdapters Signals Description Signal RS-232 COM Port Port DS Port RPC DE-9 Pin DB-25 PinAdapters Main Screen Detail Operations and ConfigurationsConfiguration Status Unit Configuration MenuDTR RTS Default is None Serial Port ConfigurationHandshaking Word Size Baud RateParity DS62-Network, DS62-MD4 Network/Modem Host Module Stop BitsRTS/DTR Line Driver Inactivity State Connect Port ID Echo Default setting is DisabledSerial Port Device Name Disconnect TimeguardAccess Control Login Setup MenuManage Users ADD User Change User’s Port Access and PasswordSelect a non-root user and the DS displays Direct Port Connection Radius ConfigurationDelete User Tacacs Configuration Tacacs Network Port Configuration Subnet Mask IP AddressBreak Length Inactivity TimeoutGateway Address Carriage Return TranslationSSH Host Key Generation IP Filter ConfigurationSelect F, Flush Rules to delete all rules. The DS displays Snmp Configuration Read/Write Community String Default is zero minutes Web Server ConfigurationDefault is Disabled Default is EnabledModule Name Internal Alarm ThresholdDS Management Select 1, the DS displays External Alarm ThresholdOutlet Groups Select 6, Delete All Outlet Groups and the DS displays Enable Firmware Upgrade Firmware / Config DownloadEnable Configuration File Upload Get Current Configuration File Restore Configuration DefaultsDisplay Configuration Error Log DS62-MD4 Modem Configuration MenuModem Host V90 Modem 9600 None None LO LO Modem Device Name Overall System Status Status MenuNetwork Status Memory Usage Logged UsersCurrent Routing Cache Processes Route SetupLogout Unit ResetUnitInfo Database Functional Solutions TroubleshootingDS62/DS62-MD4 DS62 and DS62-MD4 Reset procedureExceptions BayTech Product WarrantyEmail support@baytech.net Technical SupportReturn Authorization Process