Bay Technical Associates DS62-MD4 manual Direct Port Connection, Radius Configuration, Delete User

Page 24

DS62-Network, DS62-MD4 Network/Modem Host Module

Enter port list (mod.port,mod.port), ALL for all ports, NONE for no ports: 2.1,3.2,3.3

 

Port access for user1

X = has access

mod 2

mod 3

1234

1234

 

X

XX

 

Enter an incorrect port the DS displays:

Enter port list (mod.port,mod.port), ALL for all ports, NONE for no ports: 1.2

Input Error

Delete User

Select D), press <cr>, and type the number of the user to be deleted:

From menu above, enter number for user to delete>1

NOTE: the ‘root’ user can not be deleted.

Direct Port Connection

This will allow the user to be connected directly to a DS serial port, as determined by the TCP port, starting at TCP port 50001.

Direct

Port Connection

is

.........Disabled

Enable

? (Y/N), CR for

no

change) :

 

 

 

 

Radius Configuration

Radius is used to authenticate logins for the serial and the network ports if passwords and user names are enabled on the DS. If the Radius server rejects either the username or password or does not respond, the DS will display “Invalid Password”.

Radius Enable

1

Enable Radius Login

Radius Server Address

2

Radius server IP address 0.0.0.0 form

Radius Backup Server Address

3

Backup Radius server IP address

Radius Secret

4

Radius secret key (16 char max)

Enable DS62 usernames as backup..5

As written

Radius Login Timeout

6

Enter timeout, in seconds(>=5 and <=30)

Exit

X,CR

Select “Radius Enable” to turn on or off radius authentication. If enabled, the primary radius server address must be specified.

24

Image 24
Contents DS Series Manual DS62-Network, DS62-MD4 Network/Modem Host Module EIA-232 Serial Connection DS62-Network, DS62-MD4 Network/Modem Host Module DS62-Network, DS62-MD4 Network/Modem Host Module Installation Connection DescriptionInternal Modem Connection Power Quick Start Host ModuleSerial Setup DS-DS Login Setup Menu Access ControlNetwork Port Configuration Radius ConfigurationDS62 EIA-232 RJ-45 Signal Pin Direction Adapters Signals DescriptionSignal RS-232 COM Port Port DS Port RPC DE-9 Pin DB-25 Pin CablingAdapters Detail Operations and Configurations Main ScreenUnit Configuration Menu Configuration StatusDTR RTS Serial Port Configuration Default is NoneHandshaking Baud Rate Word SizeDS62-Network, DS62-MD4 Network/Modem Host Module Stop Bits ParityRTS/DTR Line Driver Inactivity State Default setting is Disabled Serial Port Device NameDisconnect Timeguard Connect Port ID EchoLogin Setup Menu Access ControlManage Users Change User’s Port Access and Password ADD UserSelect a non-root user and the DS displays Radius Configuration Direct Port ConnectionDelete User Tacacs Configuration Tacacs Network Port Configuration IP Address Subnet MaskInactivity Timeout Gateway AddressCarriage Return Translation Break LengthIP Filter Configuration SSH Host Key GenerationSelect F, Flush Rules to delete all rules. The DS displays Snmp Configuration Read/Write Community String Web Server Configuration Default is DisabledDefault is Enabled Default is zero minutesInternal Alarm Threshold Module NameDS Management External Alarm Threshold Select 1, the DS displaysOutlet Groups Select 6, Delete All Outlet Groups and the DS displays Firmware / Config Download Enable Firmware UpgradeEnable Configuration File Upload Restore Configuration Defaults Get Current Configuration FileDS62-MD4 Modem Configuration Menu Display Configuration Error LogModem Host V90 Modem 9600 None None LO LO Modem Device Name Status Menu Overall System StatusNetwork Status Logged Users Memory UsageCurrent Routing Cache Route Setup ProcessesUnit Reset LogoutUnitInfo Database Troubleshooting Functional SolutionsDS62 and DS62-MD4 Reset procedure DS62/DS62-MD4BayTech Product Warranty ExceptionsTechnical Support Email support@baytech.netReturn Authorization Process