Bay Technical Associates DS Series, DS62-MD4 Module Name, DS Management, Internal Alarm Threshold

Page 35

DS62-Network, DS62-MD4 Network/Modem Host Module

Web Connection Inactivity Timeout is 0 minutes

Enter timeout, in minutes (<=120, 0 to disable) :

Module Name

This option allows the admin users to change the modules name.

Module Name is: DS62-MD4 Enter Module Name (32 chars max).

:

DS Management

These options are independent of the power strip’s Alarm Thresholds. It is through these settings that the DS62 SNMP agent will send a (trap) to the designated SNMP Manager.

Use this option to set the temperature, voltage, and current alarm threshold for the DS as shown.

Host-controlled

DS Feature Configuration

Temperature Alarm Threshold

1

Under Voltage

Alarm Threshold

2

Over Voltage Alarm Threshold

3

Low Current Alarm Threshold

4

Environmental

Sensors

5

Outlet Groups

......................

6

Internal Alarm Threshold

Select any alarm threshold option and the DS will display the following:

Temperature Alarm Threshold:

Sel M/P

Identifier

Tmp Lvl

1 2/1

DS3ADE

500

Under Voltage Alarm Threshold:

Sel M/P

Identifier

Lo V Lvl

1 2/1

DS3ADE

900

Over Voltage Alarm Threshold:

Sel M/P

Identifier

Hi V Lvl

1 2/1

DS3ADE

1300

Low Current Alarm Threshold

35

Image 35
Contents DS Series Manual DS62-Network, DS62-MD4 Network/Modem Host Module EIA-232 Serial Connection DS62-Network, DS62-MD4 Network/Modem Host Module DS62-Network, DS62-MD4 Network/Modem Host Module Internal Modem Connection InstallationConnection Description Quick Start Host Module PowerSerial Setup DS-DS Access Control Login Setup MenuRadius Configuration Network Port ConfigurationCabling DS62 EIA-232 RJ-45 Signal Pin DirectionAdapters Signals Description Signal RS-232 COM Port Port DS Port RPC DE-9 Pin DB-25 PinAdapters Main Screen Detail Operations and ConfigurationsConfiguration Status Unit Configuration MenuDTR RTS Handshaking Serial Port ConfigurationDefault is None Word Size Baud RateRTS/DTR Line Driver Inactivity State DS62-Network, DS62-MD4 Network/Modem Host Module Stop BitsParity Connect Port ID Echo Default setting is DisabledSerial Port Device Name Disconnect TimeguardManage Users Login Setup MenuAccess Control ADD User Change User’s Port Access and PasswordSelect a non-root user and the DS displays Delete User Radius ConfigurationDirect Port Connection Tacacs Configuration Tacacs Network Port Configuration Subnet Mask IP AddressBreak Length Inactivity TimeoutGateway Address Carriage Return TranslationSSH Host Key Generation IP Filter ConfigurationSelect F, Flush Rules to delete all rules. The DS displays Snmp Configuration Read/Write Community String Default is zero minutes Web Server ConfigurationDefault is Disabled Default is EnabledDS Management Internal Alarm ThresholdModule Name Select 1, the DS displays External Alarm ThresholdOutlet Groups Select 6, Delete All Outlet Groups and the DS displays Enable Firmware Upgrade Firmware / Config DownloadEnable Configuration File Upload Get Current Configuration File Restore Configuration DefaultsDisplay Configuration Error Log DS62-MD4 Modem Configuration MenuModem Host V90 Modem 9600 None None LO LO Modem Device Name Network Status Status MenuOverall System Status Current Routing Cache Logged UsersMemory Usage Processes Route SetupUnitInfo Database Unit ResetLogout Functional Solutions TroubleshootingDS62/DS62-MD4 DS62 and DS62-MD4 Reset procedureExceptions BayTech Product WarrantyEmail support@baytech.net Technical SupportReturn Authorization Process