Bay Technical Associates DS62-MD4, DS Series manual Ds-Ds

DS62-Network, DS62-MD4 Network/Modem Host Module

Figure 1

DS-Series - F 2.10.05 (C) 2005 Bay Technical Associates

Module Name: DS62

Module: 1
Attention Character: ;		1
Device A	(2, 1)
Device B	(2, 2)	2
Device C	(2, 3)	3
Device D	(2, 4)	4
DS-DS	(5, 1)	5	Current configuration
Status		S
Configure		C	Make Changes
Unit Reset		RU	Resets the DS-Unit, terminates internal &
			external modem connections, allow 10
Logout		T	seconds for reset.

Enter Request :c

Select option ‘C’ for the configuration menu. Select the DS62 module option and the following menu is displayed:

Figure 2

Copyright(C) Bay Technical Associates 2006
DS62 Ethernet Host module
Revision F 2.10.05	Module 1		509	colilo version 1.05.01
Hardware 1.01	Serial number
Status..........................1			Current setting of the module
Serial Port Configuration.......2			Setup the port configuration menu
Serial Port Device Name.........3			Name the port
Attention Character.............4			Pressing the attention character 5
			consecutive times will return back to the
Disconnect Timeguard	............	5	main menu.
			If more data is received within the delay
			period, the DS series treats the
			character as data, not an attention
			character; thereby preventing unwanted
Connect Port ID Echo	............	6	port disconnection.
			Enable port echo by name or module&port#
Login Setup		7	Login menu Access/Users/Direct Port
Network Port Configuration		8	Connection/Radius/TACACS
			Network Setup IP Address
Module Name		9	Enter a name for the module
DS Management		10	Set up Voltage/Current/Sensor thresholds
Firmware / Config Download		11	Updates by FTP & Reset to Factory Config
Exit		X,CR
Enter Request :

9