Bay Technical Associates DS62-MD4, DS Series manual Login Setup Menu, Access Control

Page 10

DS62-Network, DS62-MD4 Network/Modem Host Module

Attention Character

If no Baytech power strips are to be controlled through this Data Server, skip this step. Pressing the Attention Character 5 consecutive times will access the network main menu. The Default is a semi- colon (;). Select this option to change the attention character. The DS displays the following:

Attention Character is

;

Enter Attention Character :

 

Login Setup Menu

Figure 3

Access Control

1

Telnet/Serial Enable/Disable Login prompt

Manage Users

2

Change user password or port access,

Direct Port Connection

3

add/delete user,

Enable/Disable

Radius Configuration

4

See below for Radius menu

TACACS Configuration

5

See below for TACACS menu

Exit

X,CR

 

Enter Request :

Access Control

This security feature allows the admin to enable or disable usernames and passwords for both network and serial port access.

If either login has been enabled you will get a prompt similar to the following:

Coldfire login: root

Password:

The default user and password is “root/baytech”, all lower case.

Manage Users

This menu allows the administrator to add/delete users and change their passwords for multiple users. Up to 19 users plus an administrator allowed. Usernames and passwords are case sensitive and alphanumeric. The root user can not be removed. Select Manage User and the DS displays the following:

Figure 4

User Management Menu

To change user password or port access, enter number of user. To add/delete user, select appropriate menu choice.

SNMP V3 requires passwords that are between 8 and 31 characters long Enter request, CR to exit menus.

A)...Add user 1)...root

Enter Request :

10

Image 10
Contents DS Series Manual DS62-Network, DS62-MD4 Network/Modem Host Module EIA-232 Serial Connection DS62-Network, DS62-MD4 Network/Modem Host Module DS62-Network, DS62-MD4 Network/Modem Host Module Connection Description InstallationInternal Modem Connection Power Quick Start Host ModuleSerial Setup DS-DS Login Setup Menu Access ControlNetwork Port Configuration Radius ConfigurationSignal RS-232 COM Port Port DS Port RPC DE-9 Pin DB-25 Pin DS62 EIA-232 RJ-45 Signal Pin DirectionAdapters Signals Description CablingAdapters Detail Operations and Configurations Main ScreenUnit Configuration Menu Configuration StatusDTR RTS Default is None Serial Port ConfigurationHandshaking Baud Rate Word SizeParity DS62-Network, DS62-MD4 Network/Modem Host Module Stop BitsRTS/DTR Line Driver Inactivity State Disconnect Timeguard Default setting is DisabledSerial Port Device Name Connect Port ID EchoAccess Control Login Setup MenuManage Users Change User’s Port Access and Password ADD UserSelect a non-root user and the DS displays Direct Port Connection Radius ConfigurationDelete User Tacacs Configuration Tacacs Network Port Configuration IP Address Subnet MaskCarriage Return Translation Inactivity TimeoutGateway Address Break LengthIP Filter Configuration SSH Host Key GenerationSelect F, Flush Rules to delete all rules. The DS displays Snmp Configuration Read/Write Community String Default is Enabled Web Server ConfigurationDefault is Disabled Default is zero minutesModule Name Internal Alarm ThresholdDS Management External Alarm Threshold Select 1, the DS displaysOutlet Groups Select 6, Delete All Outlet Groups and the DS displays Firmware / Config Download Enable Firmware UpgradeEnable Configuration File Upload Restore Configuration Defaults Get Current Configuration FileDS62-MD4 Modem Configuration Menu Display Configuration Error LogModem Host V90 Modem 9600 None None LO LO Modem Device Name Overall System Status Status MenuNetwork Status Memory Usage Logged UsersCurrent Routing Cache Route Setup ProcessesLogout Unit ResetUnitInfo Database Troubleshooting Functional SolutionsDS62 and DS62-MD4 Reset procedure DS62/DS62-MD4BayTech Product Warranty ExceptionsTechnical Support Email support@baytech.netReturn Authorization Process