Bay Technical Associates DS62-MD4, DS Series manual Outlet Groups

Ad

Page 37

DS62-Network, DS62-MD4 Network/Modem Host Module

Option 1 and 3 sets the temperature levels to the tenth of a degree. Option 2 and 4 enable the SNMP traps to be sent if the corresponding threshold had been exceeded.

Sel	Type	Name	Hi/En	Lo/En	St/En
1	Contact	External Sensor1	N/A	N/A	En
2	Temperature External Sensor2		999/En	320/En	N/A

Select 2), ‘All Sensors’ option allows the administrator to set parameters for the different probe types. This feature is useful for standardization and the probe type is not known due to its final location is not known. The DS displays:

For configuration of all sensors of selected type in system with a single user-supplied value.

1...Contact

2...Temperature

3...Humidity

4...Air Flow Enter Request :1

NOTE: The type ‘Contact’ signifies the unit does not recognize or detect a probe, but still be able to send SNMP Traps.

Select the specific option to set the High and Low alarm ranges and their corresponding SNMP traps.

DS/RPS External Environmental Sensor Configuration Menu

Sensor Number: All Name: all DSs/RPSs Type: Temperature/Humidity/Air Flow

1...High Threshold (tenths of meas. unit): NP

2...High Threshold Trap Enable: NP

3...Low Threshold (tenths of meas. unit): NP

4...Low Threshold Trap Enable: NP

Enter Request :

Enter threshold value in tenths of unit measurement (degrees,%%,etc.):

Outlet Groups

This is a future option not currently used. This option sets up the outlets into groups.

Outlet Group Configuration:
List Outlet Groups	1
Add Group	2
Delete Group	3
Rename Group	4
Modify Outlets in a Group	5
Delete All Outlet Groups	6
Enter Request :1

37

Image 37

Contents DS Series Manual DS62-Network, DS62-MD4 Network/Modem Host Module EIA-232 Serial Connection DS62-Network, DS62-MD4 Network/Modem Host Module DS62-Network, DS62-MD4 Network/Modem Host Module Connection Description InstallationInternal Modem Connection Quick Start Host Module PowerSerial Setup DS-DS Access Control Login Setup MenuRadius Configuration Network Port ConfigurationAdapters Signals Description DS62 EIA-232 RJ-45 Signal Pin DirectionSignal RS-232 COM Port Port DS Port RPC DE-9 Pin DB-25 Pin CablingAdapters Main Screen Detail Operations and ConfigurationsConfiguration Status Unit Configuration MenuDTR RTS Default is None Serial Port ConfigurationHandshaking Word Size Baud RateParity DS62-Network, DS62-MD4 Network/Modem Host Module Stop BitsRTS/DTR Line Driver Inactivity State Serial Port Device Name Default setting is DisabledDisconnect Timeguard Connect Port ID EchoAccess Control Login Setup MenuManage Users ADD User Change User’s Port Access and PasswordSelect a non-root user and the DS displays Direct Port Connection Radius ConfigurationDelete User Tacacs Configuration Tacacs Network Port Configuration Subnet Mask IP AddressGateway Address Inactivity TimeoutCarriage Return Translation Break LengthSSH Host Key Generation IP Filter ConfigurationSelect F, Flush Rules to delete all rules. The DS displays Snmp Configuration Read/Write Community String Default is Disabled Web Server ConfigurationDefault is Enabled Default is zero minutesModule Name Internal Alarm ThresholdDS Management Select 1, the DS displays External Alarm ThresholdOutlet Groups Select 6, Delete All Outlet Groups and the DS displays Enable Firmware Upgrade Firmware / Config DownloadEnable Configuration File Upload Get Current Configuration File Restore Configuration DefaultsDisplay Configuration Error Log DS62-MD4 Modem Configuration MenuModem Host V90 Modem 9600 None None LO LO Modem Device Name Overall System Status Status MenuNetwork Status Memory Usage Logged UsersCurrent Routing Cache Processes Route SetupLogout Unit ResetUnitInfo Database Functional Solutions TroubleshootingDS62/DS62-MD4 DS62 and DS62-MD4 Reset procedureExceptions BayTech Product WarrantyEmail support@baytech.net Technical SupportReturn Authorization Process