Bay Technical Associates DS Series, DS62-MD4 manual Select a non-root user and the DS displays

Page 23

DS62-Network, DS62-MD4 Network/Modem Host Module

Select the Change Password option to change the user password, the Host Module displays the following:

User name: root

Enter old password (CR if none)>*******

Enter new password (<= 31 characters)>*******

Confirm by re-entering new password>*******

Password change successful.

Select “Change Port Access Rights” to change the user’s assigned ports. If you select the “root user” the Host Module will display the following:

root user always has access to all ports and access rights can not be changed

Select a non-root user and the DS displays:

Port access for user1 X = has access

mod 2 mod 3 1234 1234

Enter port list (mod.port,mod.port), ALL for all ports, NONE for no ports: all

Type ‘all’ and press <cr>, the DS displays all ports available to ‘user1’:

Port access for user1 X = has access

mod 2 mod 3 1234 1234

XXXX XXXX

Enter port list (mod.port,mod.port), ALL for all ports, NONE for no ports: none

Type ‘none’ and press <cr>, the DS displays the user with no assigned ports:

Port access for user1 X = has access

mod 2 mod 3 1234 1234

To add specific ports to the user, enter the module/port numbers as shown.

23

Image 23
Contents DS Series Manual DS62-Network, DS62-MD4 Network/Modem Host Module EIA-232 Serial Connection DS62-Network, DS62-MD4 Network/Modem Host Module DS62-Network, DS62-MD4 Network/Modem Host Module Internal Modem Connection InstallationConnection Description Quick Start Host Module PowerSerial Setup DS-DS Access Control Login Setup MenuRadius Configuration Network Port ConfigurationCabling DS62 EIA-232 RJ-45 Signal Pin DirectionAdapters Signals Description Signal RS-232 COM Port Port DS Port RPC DE-9 Pin DB-25 PinAdapters Main Screen Detail Operations and ConfigurationsConfiguration Status Unit Configuration MenuDTR RTS Handshaking Serial Port ConfigurationDefault is None Word Size Baud RateRTS/DTR Line Driver Inactivity State DS62-Network, DS62-MD4 Network/Modem Host Module Stop BitsParity Connect Port ID Echo Default setting is DisabledSerial Port Device Name Disconnect TimeguardManage Users Login Setup MenuAccess Control ADD User Change User’s Port Access and PasswordSelect a non-root user and the DS displays Delete User Radius ConfigurationDirect Port Connection Tacacs Configuration Tacacs Network Port Configuration Subnet Mask IP AddressBreak Length Inactivity TimeoutGateway Address Carriage Return TranslationSSH Host Key Generation IP Filter ConfigurationSelect F, Flush Rules to delete all rules. The DS displays Snmp Configuration Read/Write Community String Default is zero minutes Web Server ConfigurationDefault is Disabled Default is EnabledDS Management Internal Alarm ThresholdModule Name Select 1, the DS displays External Alarm ThresholdOutlet Groups Select 6, Delete All Outlet Groups and the DS displays Enable Firmware Upgrade Firmware / Config DownloadEnable Configuration File Upload Get Current Configuration File Restore Configuration DefaultsDisplay Configuration Error Log DS62-MD4 Modem Configuration MenuModem Host V90 Modem 9600 None None LO LO Modem Device Name Network Status Status MenuOverall System Status Current Routing Cache Logged UsersMemory Usage Processes Route SetupUnitInfo Database Unit ResetLogout Functional Solutions TroubleshootingDS62/DS62-MD4 DS62 and DS62-MD4 Reset procedureExceptions BayTech Product WarrantyEmail support@baytech.net Technical SupportReturn Authorization Process