This can help to extend the lamp’s operating life. If using the projector in small rooms where high luminance is not required, it is recommended that you set the LAMP POWER to “LOW”.
CONTROL KEY
CONTROL KEY | ON |
| [ |
| OFF |
To disable the buttons on the
Setting up the SECURITY function
This projector is equipped with a security function. A password input screen can be displayed, or a company URL can be set up and displayed at the bottom of the projected image.
LAMP RUNTIME
This setting displays the usage time for the lamp unit which is currently being used.
NOTE:
BThe lamp’s operating life varies depending on the usage conditions (such as the LAMP POWER setting and the number of times the power is turned on and off).
FUNC 1
FUNC1INDEX
[
KEYSTONE 
This assigns a function to the F1 button of the
INDEX
Functions in the same way as the INDEX WINDOW button on the accessory card remote control unit. (page 29)
KEYSTONE
Functions in the same way as when “KEYSTONE” is selected from the MAIN MENU screen. (page 34)
projector, set CONTROL KEY to “OFF”. A confirmation screen will then be displayed. Select “OK” by using I and H buttons. To use the buttons on the projector, set to “ON” by using the remote control unit. (page 14)
AUTO POW.OFF
If any signal is not input into the projector during the time that you set up, the projector will return to standby mode. The auto power off time can be set to, from 15 minutes to 60 minutes, by 5 minutes. If you don't use this feature, set it to “DISABLE”. This feature will not function when using the freeze function.
Use the F and G buttons on the projector or remote control unit to select SECURITY, then press the ENTER button.
MENU
KEYSTONE
PICTURE
POSITION
INDEX WINDOW
SHUTTER
VOLUME
LANGUAGE
OPTION1
OPTION2
SECURITY
SELECT 
ENTER
EXIT
PASSWORD |
|
OK | RETURN |
(When you use the SECURITY function for the first time)
Press the F, H, G, I, F, H, G and I buttons in order, then press the ENTER button.
(When a password change has been made before)
Type in the changed password, then press the ENTER button.
| SECURITY |
|
INPUT | PASSWD | OFF |
AMEND | PASSWD |
|
TEXT | DISPLAY | ON |
TEXT | CHANGE |
|
SELECT ADJ | RETRN | |
INPUT PASSWD
The password input screen can be displayed when the power is turned on. All of the controls other than the POWER button are disabled unless the password is entered correctly.
ON
INPUT PASSWD is enabled.
OFF
INPUT PASSWD is disabled. The password input screen will not be displayed when the power is turned on.
AMEND PASSWD
Passwords can be changed.Press the ENTER button to display the AMEND PASSWD screen.
AMEND PASSWD
NEW
CONFIRM
OK 
RETURN
#Set a password by pressing the F,G,I, and H buttons on the remote control unit. (A maximum of 8 buttons can be set.)
$Press the ENTER button.
%Enter the password again for confirmation.
&Press the ENTER button. (Password change will be completed.)
Adjustments and settings