American Power Conversion PX Esc, PowerView LED Indicators, Navigation Keys, Color Description

Chapter 6 - The PowerView Display

PowerView LED Indicators

Four LED indicators report the operational status of the Power Array. Table 6-1 describes their function.

LED	Color	Description
LOAD ON	Green	Indicates the Power Array is
		operating in the on-line
		mode. The system is
		receiving power from the
		mains power source, and is
		supplying clean, conditioned
		power to load equipment.
ON BATT	Yellow	Indicates that a mains
		power failure has occurred,
		and that power to the load
		equipment is being supplied
		from the battery modules.
BYPASS	Yellow	Indicates that power to the
		load is being supplied
		directly from the mains
		power source. The Power
		Array has been effectively
		removed from the circuit.
FAULT	Red	Indicates the Power Array
		has detected an internal
		fault condition. An alarm
		message will appear on the
		PowerView LCD display.
		(See Chapter 9.)

Table 6-1 Power Array Display LEDs

Navigation Keys

The four navigation keys on the PowerView interface are used to select and open menu items, to access information, and to change system parameters. A small "selection arrow" at the left side of the display screen indicates the menu item or pa- rameter that is selected. The navigation keys are described in Table 6-2.

Symbol	Name	Function of Key
on Key	of Key
Esc	ESCAPE	The ESCAPE key exits
		the current screen and
		returns to the previously
		displayed screen.
−	UP	The UP key moves the
		selection arrow upward.
↓	DOWN	The DOWN key moves
		the selection arrow
		downward.
↵	ENTER	The ENTER key opens
		the selected menu, or
		opens a parameter
		selection list.

Table 6-2 PowerView Navigation Keys

6-2