American Power Conversion PX user manual Support. See inside front cover

Chapter 9 - PowerView Display Messages

	PowerView	Meaning	Corrective Action
	Message
General	Fault, Internal Temp	The temperature of one or	Replace the overheated modules.
Fault	exceeded normal limits	more battery modules is too	Refer to Chapter 8 for module
		hot.	replacement procedures.
	Input circuit breaker	The input circuit breaker on	Option #1: If this occurs in
	tripped open	the SymmetraTM has tripped.	conjunction with an overload
		Input voltage is disconnected	condition, decrease the load and
		to the SymmetraTM.	reset the breaker.
			Option #1: If no overload
			condition exists, reset breaker. If
			it trips again, call your contract
			service provider, or APC Technical
			Support. (See inside front cover.)
	System level fan failed	A cooling fan in the	Call your contract service
		SymmetraTM frame has failed.	provider, or APC Technical
			Support. (See inside front cover.)
	The Redundant	The main intelligence module	Replace the main intelligence
	Intelligence Module is in	has failed, and the RIM is	module. Refer to Chapter 8 for
	control	functioning as the primary	module replacement procedures.
		intelligence module.
	IIC inter-module	The communications between	Call your contract service
	communications failed.	the MIM and at least one	provider, or APC Technical
		other module has failed.	Support. (See inside front cover.)

9-5