■Rear View
$3 | $4 | $5 | $6 | $7 | $8 | $9 %0 %1 %2 |
$2
$1
|
|
|
|
|
|
| LINE | CAMERA |
|
|
|
|
| RS485 | TERM. | SELECT | SW IN |
|
| GENLOCK | |||
|
|
|
| OFF | ON | 2 | 4 |
|
|
| IN (VS) |
| A B | G | A B | G |
|
|
|
|
|
|
|
| T | N | R | N |
|
|
|
|
|
|
|
| D | D |
|
|
|
|
|
|
| ||
16 | 15 |
| 14 | 13 | 12 |
| 11 | 10 | 9 | 8 | 7 |
CAMERA |
|
|
|
|
|
|
|
|
|
|
|
IN |
|
|
|
|
|
|
|
|
|
|
|
CAMERA |
|
|
|
|
|
|
|
|
|
|
|
OUT | 15 |
| 14 | 13 | 12 |
| 11 | 10 | 9 | 8 | 7 |
16 |
|
| |||||||||
SPOT
OUT | I N |
65
65
REC OUT | PLAY IN | MULTISCREEN OUT | VCR CONTROL |
|
| ||
VIDEO | VIDEO | VIDEO |
|
| |||
|
|
|
| ALARM/REMOTE | REMOTE |
| |
4 | 3 | 2 | 1 |
|
| %3 | |
|
|
| |||||
|
|
|
| DATA |
| OUT | |
|
|
|
|
| %4 | ||
|
|
|
| IN |
| ||
|
|
|
| OUT |
| ||
|
|
|
|
| TERM. |
| |
|
|
|
|
| OFF ON |
|
|
4 | 3 | 2 | 1 |
| SIGNAL |
|
|
|
|
|
|
|
|
| |
|
|
|
|
| GND |
|
|
%8 %7%6%5
$1Camera Output Connectors (CAMERA OUT)
The video signal connected to the CAMERA IN connec- tor is looped through to this connector with an automat- ic 75 Ω termination.
The camera control signal multiplexed on the video sig- nal is not available at this connector. When the power switch of the video multiplexer is turned off, no signal is present at this connector.
$2Camera Input Connectors (CAMERA IN)
These connectors accept either a color or B/W compos- ite video signal from the cameras. In addition, the VD2 signal for synchronizing the vertical timing of the cam- eras, and data to control camera site devices are multi- plexed through these connectors.
$3RS485 Terminal (RS485)
This terminal is used to exchange control data with the camera site.
$4Line Termination Switch (TERM., OFF/ON)
This switch is used to enable termination of the RS485 terminal.
$5Line Selection Switch (LINE SELECT, 2/4)
This switch lets you select either Full Duplex (4 lines) or Half Duplex (2 lines) for the communication lines.
$6Camera Switching Input Connector
(CAMERA SW IN)
The camera switching pulse from the time lapse VCR is supplied to this connector.
The camera switching interval (Sequential Dwell Time) can be synchronized with the time lapse mode set in the associated time lapse VCR.
$7Gen-Lock Input Connector (GENLOCK IN (VS))
The
$8Spot Input/Output Connectors (SPOT, OUT/IN)
IN: This connector accepts the video output signal from the external system.
The supplied video can be displayed on the spot monitor screen with the specified conditions.
OUT: This connector supplies the video output signal for the spot monitor.
$9Record Output Connectors (REC OUT, VIDEO/S-VIDEO)
The recording signal for the time lapse VCR is provided via these connectors.
These connectors can also be used as multiscreen 2 output with the specified conditions.
%0Playback Input Connectors (PLAY IN, VIDEO/S-VIDEO)
The playback signal from the time lapse VCR is sup- plied to these connectors.
%1Multiscreen Output Connectors
( MULTISCREEN OUT, VIDEO/S-VIDEO)
The video output signal for the multiscreen monitor is provided via these connectors
%2RS-232C Port (VCR CONTROL, RS-232C)
The VCR control signal for the time lapse VCR is provid- ed via this connector.
Connecting a PC to this connector will allow you to remote control the video multiplexer.
%3Remote Output Connector
(VCR CONTROL, REMOTE OUT)
The VCR control signal for the time lapse VCR is provid- ed via this connector.
You can select in the setup menu whether to have the VCR control signal supplied from this connector or the
%4Alarm/Remote Port (ALARM/REMOTE)
This connector accepts the alarm signals from the associated alarm contacts and the control signals from the external system.
%5Power Cord
10