Panasonic WJ-FS616C manual Multiscreen 2 Output Setup

3.Select the desired switching timing indicated as the field interval (4 to 999) by pressing the A or B button.

Notes:

•Numbers can also be input directly with the Camera Number buttons (1 - 10).

•Refer to the operating instructions of the VCR for switching timing.

When MODE9 is selected in this table, select EXT1 or EXT4 by pressing the A or B button.

EXT1: Enables spot image recording on the VCR.

EXT4: Enables quad images recording on the VCR.

4.Press the [HOME/SET] button to move the cursor to the right in the recording mode title column.

The square cursor appears in the character table.

5.To select a character, move the cursor on the desired character in the table by pressing the C, D, A, or B buttons.

6.Press the [HOME/SET] button to pick up the character and place it in the title column.

7.Repeat steps 5 and 6 above to edit the title.

8.If a wrong character is selected, press the - or + button to move the cursor in the title column.

Note: Press the + button to move the cursor to the right, or press the - button to move the cursor to the left.

Then press the [HOME/SET] button to overwrite the character with the character selected from the table.

9.Press the [SET UP/ESC] button. The cursor moves to MODE number.

10.Repeat steps 1 to 9 above to assign the other MODE numbers.

11.After completing the setting, press the [SET UP/ESC] button to return to the REC OUTPUT SETUP menu.

12.After finishing the setting, press the [SET UP/ESC] but- ton to return to the previous SETUP MENU.

■Multiscreen 2 Output Setup

These items let you select the display mode when connect- ing the Record Output (REC OUT) to the monitor for multi- screen 2 monitor.

WJ-FS616C SETUP MENU

ALARM SETUP *

MULTI OUTPUT SETUP *

SPOT OUTPUT SETUP *

REC/MULTI2		MULTI2 OUTPUT *
SYSTEM SETUP *
CAM DOWNLOAD		NO
CAM	UPLOAD	NO
ALL	RESET SELECT *

1.Move the cursor to the REC/MULTI2 parameter in the

SETUP MENU.

2.Select MULTI2 OUTPUT and then press the [HOME/SET] button.

The MULTI2 OUTPUT SETUP menu as shown in the fig- ure appears on the monitor screen.

MULTI2 OUTPUT SETUP

DISPLAY POSITION *

SEQUENCE MODE SEQ2

34