Panasonic WJ-FS616C manual Displaying the Camera and Playback Images

3.To return to single spot monitoring, select an image to be displayed by pressing a [1 – 16] button.

Or to return to screen segments display, press the [MULTISCREEN SELECT] button.

Note: The same channel cannot be displayed in multi- ple segments.

If this attempt is made, only the image of the chan- nel with the lowest number is displayed; the other segments appear black out.

■Displaying the Camera and Playback Images

The following procedures are not applicable to the Multiscreen 2 Monitor.

•One segment of the multiscreen for camera images can be assigned to playback.

•This function is available with the 4-, 7-, 10- or 13-seg- ment multiscreen modes.

•The playback image will be displayed in the upper left segment of the multiscreen.

•This function is not available when S-VIDEO playback input is used.

To enable this function, connect with the VIDEO play- back input at the same time. The VIDEO playback image is displayed automatically without making any setting changes.

●Multiscreen Spot

(Live Images with a Playback Image)

1.Select the cameras live mode (indicator off) by pressing the [VCR/CAM] button.

VCR

CAM

2.Select the screen segments to be displayed on the monitor by pressing the [MULTISCREEN SELECT] but- ton repeatedly.

Confirm that the 4-, 7-, 10- or 13-segment multiscreen is selected for the camera images.

If not, press the [MULTISCREEN SELECT] button repeatedly until the desired multiscreen appears.

	1		2		1			2
	3		4		3			4	5
								6	7
	1		2	3	1				2
			4	5
6		7	8	9	3		4	5		6
10		11	12	13		7	8	9		10

3.Press the [FUNCTION] button. The indicator in the but- ton starts to blink.

FUNCTION

4.Select the playback channel you want to display by pressing the corresponding [1 – 16] button.

The indicator in the [FUNCTION] button lights, and the selected playback image is displayed in the upper left segment of the multiscreen.

Camera	Camera
1	2
Camera	Camera
3	4

Playback	Camera
	2
Camera	Camera
3	4

5.To display another playback image, press the [FUNC- TION] button.

The indicator in the button starts to blink.

Select the channel you want to display by pressing the corresponding [1 – 16] button.

6.To return to the camera images multiscreen, press the [MULTISCREEN SELECT] button.

Or to display the playback image in single spot mode, press the [VCR/CAM] button.

Note: To return to the previous camera images multi- screen, press the [FUNCTION] button while the indicator in the button is blinking.

54