Panasonic WJ-FS616C manual Alarm Control Function, Auxiliary Control

●Auxiliary Control

The following function is available only with a system that includes WV-RC100 or WV-RC150 Receivers.

1.Select the desired monitor and camera referring to the Camera Selection procedure described above.

2.While the ALT indicator is on, press the [HOME/–] or [AUTO/+] button to toggle the user’s auxiliary switch in the receiver on and off.

ALT HOME/– AUTO/+

AUX1 AUX2

Note: The auxiliary control is not available while operat- ing the zoom or pan/tilt head.

Alarm Control Function

■Alarm Suspension

This function disables activation of the alarm link and instead enables storing of any alarm activated in the alarm log.

It is used to suspend the alarm link during camera setup.

To suspend the alarm:

1.Press the [RESET] and [EL-ZOOM] buttons at the time for 2 seconds or more to suspend the alarm.

The indicator in the RESET button lights.

RESET EL-

ZOOM

ALL FS

RESET

2.Press the [RESET] button to reset the alarm suspension. The indicator in the RESET button goes off.

74