Panasonic WJ-FS616C manual Preface, Features

Page 5

PREFACE

The WJ-FS616C Video Multiplexer is designed to multiplex the field signals from video cameras and record the camera images on a time lapse VCR.

Up to 16 cameras can be connected to the unit for monitor- ing images in multiscreen, sequence, freeze or electronic zoom mode on a video monitor screen.

The WJ-FS616C Video Multiplexer allows you to control camera functions such as lens focussing, zooming, and iris, positioning of the pan/tilt head, etc. This makes the system highly flexible and sophisticated, and allows expansion to up to 64 cameras.

FEATURES

The images of any connected camera can be displayed on full screen or on a 4, 7, 9, 10, 13 and 16 multiscreen as shown below.

4-SEGMENT 7-SEGMENT

 

9-SEGMENT

10-SEGMENT

13-SEGMENT 16-SEGMENT

SCREEN

 

SCREEN

 

SCREEN

 

SCREEN

 

SCREEN

 

SCREEN

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

(7, 10 and 13 multiscreens are not available for play- back images.)

In addition, one playback image can be displayed with camera images in 4, 7, 10 and 13 multiscreens.

The pattern of a spot sequence consisting of up to 32 steps can be programmed by presetting the channel order and individual dwell time.

The pattern of a 4, 7, 9, 10, 13, or 16 multiscreen sequence consisting of up to 5 steps can be pro- grammed as shown below.

Electronic zoom and freeze image functions are avail- able. The zoom area can be selected with the direction buttons.

Up to 16 camera images multiplexed by the field rate are available at the REC OUT connector for recording on the time lapse VCR. Alarm priority recording is sup- ported.

Camera functions such as pan/tilt, lens zoom, focus and iris, and camera setup can be controlled via a coaxial cable or RS-485 interface.

The WJ-FS616C has a versatile alarm mode to optimize its multiscreen output, spot output, and record output.

REC, PLAY, REW, FF, etc. can be controlled from the front panel of the video multiplexer, via the RS-232C interface or the wired remote control terminal of the Panasonic Time Lapse VCR.

The WJ-FS616C can be controlled from a PC or the WV- CU550C and WV-CU360C System Controller via RS- 232C or RS-485 interface.

 

2 sec

5 sec

4 sec

3 sec

1 sec

 

 

 

 

 

 

 

 

 

5

Image 5
Contents Operating Instructions Lightning flash with arrowhead symbol Important Safety Instructions Contents Preface FeaturesFully charge up the backup battery PrecautionsDo not drop metallic parts through slots Do not attempt to disassemble the applianceLock Indicator Lock Power Switch Power ON/OFFAlarm Reset Button Reset Alarm Indicator Alarm@2Preset Position Button PRE-POSI Camera Number Buttons Camera Preset Position Number ButtonsSpot Monitor Button Spot Multiscreen Monitor Button Multiscreen#2Lock Switch Lock OFF/ON #1Setup/Escape Button SET UP/ESC@6Direction Buttons UP/DOWN/LEFT/RIGHT Left Left Right Right @7Auto Button Auto$2Camera Input Connectors Camera $1Camera Output Connectors Camera OUT$4Line Termination Switch TERM., OFF/ON $5Line Selection Switch Line SELECT, 2/48Data Port DATA, OUT/IN Installing the WV-PB6164 Data Multiplex Boards InstallationTally Output Setting Dummy Black Image Setting DIP Switch SettingAlarm Output Setting Mounting into the Rack Shown below is an example of a basic system connection ConnectionsConnection with the Camera Sites Connections for RS-485 type camera Connection with the PC Connection with the MonitorsData port RS-232CConnection with External Remote Control Switches Connection with Alarm SensorsSpot and Multiscreen Monitor Monitors and DisplaysConnect the time lapse VCR as shown in the example below Connection with the Time Lapse VCRSetup Procedures Displaying the Setup Menu Setup MenuSetup Menu Programming Setup MenuAlarm Schedule Alarm SetupAlarm Recall Video Loss Alarm Camera Site AlarmCamera Switching Pulse Loss Alarm Alarm Display on the MonitorsAlarm Mode on the Spot Monitor Alarm Mode on the Multiscreen MonitorAlarm Recording Mode Dwell Time for Alarm SequenceCamera Title Display Multiscreen Output SetupClock Display Still DisplaySecret View Camera Display Position SettingSequence Mode Spot Output Setup Record Output Setup Record or Multiscreen 2 Output SetupCamera Title Display Clock DisplayDynamic Recording Recording Mode SetupRecording Mode Setting Details Multiscreen 2 Output Setup Camera Display Position Sequence ModeClock Display Position System SetupClock Setup Sequence Setup Camera Title SetupCamera Title Display Position Spot Sequence SEQ1Auto Skip Preset PositionImage Assignment Dwell Time Uniform Dwell TimeDwell Time Multi Sequence SEQ2, SEQ3Camera/Playback Sequence Timing Multiscreen Monitor Lock ModeSequence Timing Spot Monitor Programming Steps 2 toCable Compensation/VD2/Data Alarm Terminal SetupData Mode Playback ModeRS-232C Mode Communication Port SetupUnit Address Daisy ModeVCR Input Select Password Registration PasswordCamera Upload Other Setup MenusCamera Download All Reset Operating Procedures Selecting the Spot Monitor Controlling the Video Input and MonitorsSingle Sequence Live Single Spot LiveControlling the Camera Images Selecting the Multiscreen MonitorSingle Spot Live Freezing Single Spot LiveFreezing Multiscreen Spot Live Zooming Single Spot LiveMultiscreen Spot Live Single or Multi Sequence Live Controlling the Playback ImagesFreezing Single Spot Playback Single Spot PlaybackMultiscreen Spot Playback Zooming Single Spot PlaybackFreezing Multiscreen Spot Playback Single or Multi Sequence PlaybackMultiscreen Spot Live Images with a Playback Image Displaying the Camera and Playback ImagesFreezing Multiscreen Spot Live Images with a Playback Image Camera Control Function Controlling Camera Site AccessoriesCamera Selection Lens ControlCamera Setup Pan/Tilt Control Preset OperationPan/Tilt Control Home Position Pan/Tilt Control Auto PanningSimplified preset position setting Alarm Operation Alarm Control FunctionAlarm Input Spot Output Multiscreen OutputExample of Using Multiscreen 2 Monitor Alarm ResetReset Spot Alarm SuspensionRecording on the Time Lapse VCR Camera Switching Pulse Loss DisplayOther Function Operating Procedures with WV-CU550C Major Operating Controls and Their Functions System Controller WV-CU550CSet Up button SET UP D Busy Indicator BusyTime Lapse Mode Buttons T/L MODE, D C 5Preset Position Button PRE-POSI@4Termination switch TERM., ON/OFF @2Alarm Reset button Reset@5Controller Unit Number switch Controller Unit no @6Mode Selection switch ModeConnection with the WV-CU550C System Controller InstallationsModifying the Front Panel WJ-FS616C WV-CU550C Function Setup Menu Operations with WV-CU550CControlling the Video Input and Monitors Function Operations with WV-CU550CCamera Control Function RES A.RES Auxiliary Control Alarm Control FunctionSystem Expansion Connections Operating ProcedureOther Applications ApplicationFor Main Site For Local SiteResponse Command Transmission CommandAppendix Communication ProtocolTransmission Response Parameter Ascii Command Ascii Command TableTable below 19 kinds None QOPResponse Command Ascii Main Unit Information Standard Accessories SpecificationsPanasonic Canada Inc