Panasonic WJ-FS616C manual Connection with the Time Lapse VCR

■Connection with the Time Lapse VCR

Connect the time lapse VCR as shown in the example below.

									Video Multiplexer
									WJ-FS616C
CAMERA	REC OUT					PLAY	IN			VCR CONTROL
										R2–232C
SW IN	VIDEO	S–VIDEO			VIDEO		S–VIDEO			See Notes
										REMOTE
										OUT
								9	8
							19	ALARM/REMOTE		1
							37	28	26	20
						Time Lapse VCR
	VIDEO IN				VIDEO OUT
			S-VIDEO
			AUDIO
	CAMERA
	GND SW OUT
		1	3	4	7	16

1	2	3	4	5	6	7	8	9	10 11 12 13 14 15 16
1	ALARM			5	ALARM			9	WARNING	13	SERIES
		IN				OUT			OUT		REC IN
2		COM		6	1 SHOT IN			10	HUMID OUT	14	SERIES
											REC OUT
3	ALARM			7		COM		11	REC OUT	15	TIME
	RESET IN										ADJUST IN
4	ALARM			8	TAPE END			12	REC REVIEW	16	TIME
	RECOVER OUT					OUT			OUT		ADJUST OUT

Notes:

•Before controlling the VCR through the REMOTE OUT connector:

1.Power up the video multiplexer and the VCR simul- taneously.

2.Connect the video signal cable between the multi- plexer and the VCR.

•The REMOTE OUT performs similarly to the AG-A11 Remote Controller for Time Lapse VCRs.

•To control the VCR remotely, connect it with either the RS-232C Port or REMOTE OUT Connector.

•When using the REMOTE OUT Connector for controlling the VCR remotely, reverse play and recording duration operations are disabled due to system designation.

•The VCRs shown below can be controlled remotely.

<REMOTE OUT> AG-RT600A, AG-TL500 AG-6124

<RS-232C> AG-6740* AG-TL500

(*Optional interface adapter is required)

22