Panasonic WJ-FS616C manual Specifications, Standard Accessories

Page 81

SPECIFICATIONS

Power Source:

120 V AC 60 Hz

 

Power Consumption:

50 W

 

Camera Input (1-16):

1.0 V[p-p] /75 composite video signal

 

 

0.5 V[p-p] /75 data signal and 2.5 V[p-p] /75 vertical timing pulse multiplexed.

Camera Output (1-16):

1.0 V[p-p] /75 composite video signal

 

Spot Output:

1.0 V[p-p] /75 composite video signal

 

Multiscreen Output:

1.0 V[p-p] /75 composite video signa

 

 

Y Signal; 0.714 V[p-p], C Signal; 0.286 V[p-p] /75

S-video signal

Recording Output:

1.0 V[p-p] /75 composite video signal

 

 

Y Signal; 0.714 V[p-p], C Signal; 0.286 V[p-p] /75

S-video signal

Playback Input:

1.0 V[p-p] /75 composite video signal

 

 

Y Signal; 0.714 V[p-p], C Signal; 0.286 V[p-p] /75

S-video signal

Alarm/Remote Control:

37-pin D-sub Connector

 

VCR Control (RS-232C):

25-pin D-sub Connector

 

VCR Control (Wired):

Mini-jack f2.5 mm

 

Ambient Operating Temperature:

–10˚C - +50˚C (14˚F - 122˚F)

 

Ambient Operating Humidity:

Less than 90 %

 

Dimensions:

420 mm (W) X 88 mm (H) X 350 mm (D)

 

 

[16-9/16” (W) X 3-7/16” (H) X 13-3/4” (D)]

 

Weight:

6.5 kg (14.3 lbs.)

 

Dimensions and weight are approximate.

Specifications are subject to change without notice.

STANDARD ACCESSORIES

Rack Mounting Bracket

2 pcs.

Screws (M4 x 10)

4 pcs.

Switch Protector

1 pc.

82

Image 81
Contents Operating Instructions Lightning flash with arrowhead symbol Important Safety Instructions Contents Preface FeaturesFully charge up the backup battery PrecautionsDo not drop metallic parts through slots Do not attempt to disassemble the applianceLock Indicator Lock Power Switch Power ON/OFFAlarm Reset Button Reset Alarm Indicator Alarm@2Preset Position Button PRE-POSI Camera Number Buttons Camera Preset Position Number ButtonsSpot Monitor Button Spot Multiscreen Monitor Button Multiscreen#2Lock Switch Lock OFF/ON #1Setup/Escape Button SET UP/ESC@6Direction Buttons UP/DOWN/LEFT/RIGHT Left Left Right Right @7Auto Button Auto$2Camera Input Connectors Camera $1Camera Output Connectors Camera OUT$4Line Termination Switch TERM., OFF/ON $5Line Selection Switch Line SELECT, 2/48Data Port DATA, OUT/IN Installing the WV-PB6164 Data Multiplex Boards InstallationTally Output Setting DIP Switch Setting Alarm Output SettingDummy Black Image Setting Mounting into the Rack Shown below is an example of a basic system connection ConnectionsConnection with the Camera Sites Connections for RS-485 type camera Connection with the PC Connection with the MonitorsData port RS-232CConnection with External Remote Control Switches Connection with Alarm SensorsSpot and Multiscreen Monitor Monitors and DisplaysConnect the time lapse VCR as shown in the example below Connection with the Time Lapse VCRSetup Procedures Displaying the Setup Menu Setup MenuSetup Menu Programming Setup MenuAlarm Setup Alarm RecallAlarm Schedule Video Loss Alarm Camera Site AlarmCamera Switching Pulse Loss Alarm Alarm Display on the MonitorsAlarm Mode on the Spot Monitor Alarm Mode on the Multiscreen MonitorAlarm Recording Mode Dwell Time for Alarm SequenceCamera Title Display Multiscreen Output SetupClock Display Still DisplayCamera Display Position Setting Sequence ModeSecret View Spot Output Setup Record Output Setup Record or Multiscreen 2 Output SetupCamera Title Display Clock DisplayRecording Mode Setup Recording Mode Setting DetailsDynamic Recording Multiscreen 2 Output Setup Camera Display Position Sequence ModeSystem Setup Clock SetupClock Display Position Sequence Setup Camera Title SetupCamera Title Display Position Spot Sequence SEQ1Auto Skip Preset PositionImage Assignment Dwell Time Uniform Dwell TimeMulti Sequence SEQ2, SEQ3 Camera/PlaybackDwell Time Sequence Timing Multiscreen Monitor Lock ModeSequence Timing Spot Monitor Programming Steps 2 toCable Compensation/VD2/Data Alarm Terminal SetupData Mode Playback ModeRS-232C Mode Communication Port SetupDaisy Mode VCR Input SelectUnit Address Password Registration PasswordOther Setup Menus Camera DownloadCamera Upload All Reset Operating Procedures Selecting the Spot Monitor Controlling the Video Input and MonitorsSingle Sequence Live Single Spot LiveControlling the Camera Images Selecting the Multiscreen MonitorSingle Spot Live Freezing Single Spot LiveZooming Single Spot Live Multiscreen Spot LiveFreezing Multiscreen Spot Live Single or Multi Sequence Live Controlling the Playback ImagesFreezing Single Spot Playback Single Spot PlaybackMultiscreen Spot Playback Zooming Single Spot PlaybackFreezing Multiscreen Spot Playback Single or Multi Sequence PlaybackMultiscreen Spot Live Images with a Playback Image Displaying the Camera and Playback ImagesFreezing Multiscreen Spot Live Images with a Playback Image Camera Control Function Controlling Camera Site AccessoriesCamera Selection Lens ControlCamera Setup Pan/Tilt Control Preset OperationPan/Tilt Control Home Position Pan/Tilt Control Auto PanningSimplified preset position setting Alarm Control Function Alarm InputAlarm Operation Spot Output Multiscreen OutputExample of Using Multiscreen 2 Monitor Alarm ResetReset Spot Alarm SuspensionCamera Switching Pulse Loss Display Other FunctionRecording on the Time Lapse VCR Operating Procedures with WV-CU550C Major Operating Controls and Their Functions System Controller WV-CU550CSet Up button SET UP D Busy Indicator BusyTime Lapse Mode Buttons T/L MODE, D C 5Preset Position Button PRE-POSI@4Termination switch TERM., ON/OFF @2Alarm Reset button Reset@5Controller Unit Number switch Controller Unit no @6Mode Selection switch ModeInstallations Modifying the Front PanelConnection with the WV-CU550C System Controller WJ-FS616C WV-CU550C Function Setup Menu Operations with WV-CU550CControlling the Video Input and Monitors Function Operations with WV-CU550CCamera Control Function RES A.RES Auxiliary Control Alarm Control FunctionSystem Expansion Connections Operating ProcedureOther Applications ApplicationFor Main Site For Local SiteResponse Command Transmission CommandAppendix Communication ProtocolTransmission Response Parameter Ascii Command Ascii Command TableTable below 19 kinds None QOPResponse Command Ascii Main Unit Information Standard Accessories SpecificationsPanasonic Canada Inc