●Zooming Single Spot (Playback)
While the image on the monitor screen is displayed in sin- gle spot mode, the image can be zoomed followed the pro- cedure below.
1.Select an image to be zoomed on the monitor by press- ing a [1 – 16] button.
The indicator in the selected button lights and the cam- era image corresponding to the button appears on the monitor screen.
2.Press the
The indicator in the button lights to indicate zoom mode is selected.
3.In the zoom mode, pressing the C, D, A, or B button will move the image in the direction of the button.
4.To cancel this mode, press the
The indicator in the button goes off.
●Multiscreen Spot (Playback)
The monitor can display the playback images on a 4, 9 and 16 multiscreen shown below.
1.Select the screen segments to be displayed on the monitor by pressing the [MULTISCREEN SELECT] but- ton repeatedly.
Each time the [MULTISCREEN SELECT] button is pressed, the next group of 3 multiscreens available is displayed as follows.
SCREEN SCREEN SCREEN
Notes:
•The
•The same channel cannot be displayed in multiple segments.
If this attempt is made, only the image of the chan- nel with the lowest number is displayed; the other segments appear black out.
•The videotape recorded in quad images mode is disabled display in multiscreen.
To display the videotape, select mode in single spot.
2.To display a single spot image, select an image to be displayed on the monitor by pressing one of the CAM- ERA buttons that the indicator in the button lights up.
●Freezing Multiscreen Spot (Playback)
The monitor can display the freeze playback images on a 4, 9 and 16 multiscreen shown below.
1.Select the screen segments to be displayed on the monitor by pressing the [MULTISCREEN SELECT] but- ton repeatedly.
2.Press the [STILL] button. The indicator in the button lights.
3.Select an image to be frozen on the monitor by press- ing a [1 – 16] button.
The indicator in the selected button start blink and the playback image corresponding to the button is dis- played in freeze on the monitor screen.
Note: You can apply this function to multiple images on the monitor screen
4.Press the blinking CAMERA button to cancel the freeze function individually.
5.Press the [STILL] button to return to the normal play- back images.
The indicator in the STILL button goes off.
6.To display a single spot image, select an image to be displayed on the monitor by pressing one of the CAM- ERA buttons that the indicator in the button lights up.
●Single or Multi Sequence (Playback)
A series of playback images can be displayed in succes- sion on the monitor screen for the specified duration.
Each sequence step can be combined with multiple screen segments and single image.
Refer to the Sequence Setup for further details.
1.Press the [SEQUENCE] button to run the assigned sequence (SEQ1, SEQ2 or SEQ3) forward on the moni- tor screen.
The indicator in the button lights to indicate that the sequence mode is selected.
SEQ1: Single Sequence
SEQ2: Multi Sequence
SEQ3: Multi Sequence
The indicator in the CAMERA buttons light up and the camera image corresponding to the buttons appear on the monitor screen.
2.During the sequence, press the [SEQUENCE] button to move one step forward in the sequence.
53