Panasonic WJ-FS616C manual Spot Monitor Button Spot, Multiscreen Monitor Button Multiscreen

Page 8

tSpot Monitor Button (SPOT)

This button is used to operate the spot monitor connect- ed to the SPOT OUT connector on the rear of the video multiplexer.

The indicator (Green) in the button lights to indicate that the spot monitor is selected, and enables control of the monitor.

yMultiscreen Monitor Button (MULTISCREEN)

This button is used to operate the multiscreen monitor connected to the MULTISCREEN OUT connector on the rear of the video multiplexer.

The indicator (Green) in the button lights to indicate that the multiscreen monitor is selected, and enables control of the monitor.

Note: When the monitor is connected to the REC OUT connector for using as Multiscreen 2 Output, this button alternately selects multiscreen output or mul- tiscreen 2 output.

The indicator blinks to indicate that the multiscreen 2 output is selected.

uMultiscreen Selection Button (MULTISCREEN SELECT)

This button is used to select the multiscreen pattern to be displayed on the multiscreen monitor while monitor- ing the camera images or VCR playback images.

Pressing this button will toggle the screen pattern as follows:

Camera Images:

4791013164 screen segments

VCR Playback Images:

49164 screen segments

iSequence Button (SEQUENCE)

This button is used to activate the sequence mode. In this mode, a series of camera images is displayed in succession on the monitor screen for the specified duration.

The indicator (Green) in the button lights to indicate that this mode is selected.

oCamera Number Buttons (CAMERA) Preset Position Number Buttons

(PRESET POSITION) CAMERA:

These buttons select the camera images corre- sponding to the button.

The indicator (Green) in the button lights to indicate the camera number currently selected.

PRESET POSITION:

These buttons are used in combination with the PRE POSI button to assign a preset position number to the selected camera.

!0VCR/Camera Selection Button (VCR/CAM)

This button is used to select the camera image or VCR playback image to be displayed on the multiscreen monitor screen.

The indicator (Green) in the button lights to indicate that the VCR mode is selected.

Note: The above operation is not valid unless multi- screen output is selected by pressing the MULTI- SCREEN button.

!1Control Panel

Press “PUSH OPEN” panel to open the control panel.

@1Function Button (FUNCTION)

This button is used to display the camera images with a VCR playback image on the multiscreen monitor.

While displaying the setup menu on the monitor, press- ing this button will select the next page of the setup menu.

@2Preset Position Button (PRE-POSI)

This button is used to assign a preset position to a specified camera.

@3Still Button (STILL)

Decrement Button (–)

This button is used to freeze the image currently dis- played on the multiscreen monitor.

The indicator (Green) in the button lights to indicate that the freeze mode is selected.

While displaying the setup menu on the monitor, press- ing this button will select the parameter reversely in the setup menu.

@4Electronic Zoom Button (EL-ZOOM)

Increment Button (+)

This button is used to zoom the image currently dis- played on the multiscreen monitor.

The indicator (Green) in the button lights to indicate that the zoom mode is selected.

While displaying the setup menu on the monitor, press- ing this button will select the parameter forwardly in the setup menu.

@5Home/Set Button (HOME/SET)

This button is used to return to the home position of the camera.

While displaying the setup menu on the monitor, press- ing this button will execute the currently highlighted selection and to enter a submenu in the setup menu if the item has its own setting menu.

8

Image 8
Contents Operating Instructions Lightning flash with arrowhead symbol Important Safety Instructions Contents Features PrefacePrecautions Fully charge up the backup batteryDo not drop metallic parts through slots Do not attempt to disassemble the appliancePower Switch Power ON/OFF Lock Indicator LockAlarm Reset Button Reset Alarm Indicator AlarmCamera Number Buttons Camera Preset Position Number Buttons @2Preset Position Button PRE-POSISpot Monitor Button Spot Multiscreen Monitor Button Multiscreen#1Setup/Escape Button SET UP/ESC #2Lock Switch Lock OFF/ON@6Direction Buttons UP/DOWN/LEFT/RIGHT Left Left Right Right @7Auto Button Auto$1Camera Output Connectors Camera OUT $2Camera Input Connectors Camera$4Line Termination Switch TERM., OFF/ON $5Line Selection Switch Line SELECT, 2/48Data Port DATA, OUT/IN Installation Installing the WV-PB6164 Data Multiplex BoardsTally Output Setting Dummy Black Image Setting DIP Switch SettingAlarm Output Setting Mounting into the Rack Connections Shown below is an example of a basic system connectionConnection with the Camera Sites Connections for RS-485 type camera Connection with the Monitors Connection with the PCData port RS-232CConnection with Alarm Sensors Connection with External Remote Control SwitchesMonitors and Displays Spot and Multiscreen MonitorConnection with the Time Lapse VCR Connect the time lapse VCR as shown in the example belowSetup Procedures Setup Menu Displaying the Setup MenuProgramming Setup Menu Setup MenuAlarm Schedule Alarm SetupAlarm Recall Camera Site Alarm Video Loss AlarmCamera Switching Pulse Loss Alarm Alarm Display on the MonitorsAlarm Mode on the Multiscreen Monitor Alarm Mode on the Spot MonitorAlarm Recording Mode Dwell Time for Alarm SequenceMultiscreen Output Setup Camera Title DisplayClock Display Still DisplaySecret View Camera Display Position SettingSequence Mode Spot Output Setup Record or Multiscreen 2 Output Setup Record Output SetupCamera Title Display Clock DisplayDynamic Recording Recording Mode SetupRecording Mode Setting Details Multiscreen 2 Output Setup Sequence Mode Camera Display PositionClock Display Position System SetupClock Setup Camera Title Setup Sequence SetupCamera Title Display Position Spot Sequence SEQ1Preset Position Auto SkipImage Assignment Dwell Time Uniform Dwell TimeDwell Time Multi Sequence SEQ2, SEQ3Camera/Playback Lock Mode Sequence Timing Multiscreen MonitorSequence Timing Spot Monitor Programming Steps 2 toAlarm Terminal Setup Cable Compensation/VD2/DataPlayback Mode Data ModeRS-232C Mode Communication Port SetupUnit Address Daisy ModeVCR Input Select Password Password RegistrationCamera Upload Other Setup MenusCamera Download All Reset Operating Procedures Controlling the Video Input and Monitors Selecting the Spot MonitorSingle Sequence Live Single Spot LiveSelecting the Multiscreen Monitor Controlling the Camera ImagesSingle Spot Live Freezing Single Spot LiveFreezing Multiscreen Spot Live Zooming Single Spot LiveMultiscreen Spot Live Controlling the Playback Images Single or Multi Sequence LiveSingle Spot Playback Freezing Single Spot PlaybackZooming Single Spot Playback Multiscreen Spot PlaybackFreezing Multiscreen Spot Playback Single or Multi Sequence PlaybackDisplaying the Camera and Playback Images Multiscreen Spot Live Images with a Playback ImageFreezing Multiscreen Spot Live Images with a Playback Image Controlling Camera Site Accessories Camera Control FunctionCamera Selection Lens ControlPan/Tilt Control Preset Operation Camera SetupPan/Tilt Control Home Position Pan/Tilt Control Auto PanningSimplified preset position setting Alarm Operation Alarm Control FunctionAlarm Input Multiscreen Output Spot OutputAlarm Reset Example of Using Multiscreen 2 MonitorAlarm Suspension Reset SpotRecording on the Time Lapse VCR Camera Switching Pulse Loss DisplayOther Function Operating Procedures with WV-CU550C System Controller WV-CU550C Major Operating Controls and Their FunctionsBusy Indicator Busy Set Up button SET UP DTime Lapse Mode Buttons T/L MODE, D C 5Preset Position Button PRE-POSI@2Alarm Reset button Reset @4Termination switch TERM., ON/OFF@5Controller Unit Number switch Controller Unit no @6Mode Selection switch ModeConnection with the WV-CU550C System Controller InstallationsModifying the Front Panel Setup Menu Operations with WV-CU550C WJ-FS616C WV-CU550C FunctionFunction Operations with WV-CU550C Controlling the Video Input and MonitorsCamera Control Function RES A.RES Alarm Control Function Auxiliary ControlSystem Expansion Operating Procedure ConnectionsOther Applications ApplicationFor Local Site For Main SiteTransmission Command Response CommandAppendix Communication ProtocolCommand Table Transmission Response Parameter Ascii Command AsciiQOP Table below 19 kinds NoneResponse Command Ascii Main Unit Information Specifications Standard AccessoriesPanasonic Canada Inc