Panasonic WJ-FS616C manual Controlling the Playback Images, Single or Multi Sequence Live

Page 51

2.Press the [STILL] button. The indicator in the button lights.

3.Select an image to be frozen on the monitor by press- ing a [1 – 16] button.

The indicator in the selected button start blink and the camera image corresponding to the button is displayed in freeze on the monitor screen.

STILL

STILL

1

Note: You can apply this function to multiple images on the monitor screen

4.Press the blinking CAMERA button to cancel the freeze function individually.

5.Press the [STILL] button to return to the normal camera images.

The indicator in the STILL button goes off.

6.To display a single spot image, select an image to be displayed on the monitor by pressing one of the CAM- ERA buttons that the indicator in the button lights up.

Single or Multi Sequence (Live)

A series of camera images can be displayed in succession on the monitor screen for the specified duration.

Each sequence step can be combined with multiple screen segments and single image.

Refer to the Sequence Setup for further details.

1.Press the [SEQUENCE] button to run the assigned sequence (SEQ1, SEQ2 or SEQ3) forward on the moni- tor screen.

The indicator in the button lights to indicate that the sequence mode is selected.

SEQUENCE

 

 

 

1

2

5

6

 

 

 

 

 

 

 

 

 

 

 

3

4

7

8

1

2

3

4

13

14

9

10

5

6

7

8

 

 

 

 

9

10

11

12

15

16

11

12

13 14

15

16

 

 

 

 

SEQ1: Single Sequence

SEQ2: Multi Sequence

SEQ3: Multi Sequence

The indicator in the CAMERA buttons light up and the camera image corresponding to the buttons appear on the monitor screen.

2.During the sequence, press the [SEQUENCE] button to move one step forward in the sequence.

3.To return to single spot monitoring, select an image to be displayed by pressing a [1 – 16] button.

Or to return to screen segments display, press the [MULTISCREEN SELECT] button.

Notes:

You can also enable the auto skip function to skip any steps when no video signal is present.

(or a screen segment is blacked out on the multi- screen display.)

Refer to AUTO SKIP in the Sequence Setup for fur- ther details.

The setting can be adjusted in such a way that the sequence step for displaying an image on the spot monitor screen in the single spot mode can be skipped automatically.

(or a screen segment is blacked out on the multi- screen display.)

Refer to the SECRET VIEW for further details.

Controlling the Playback Images

The following procedure is not applicable for multiscreen 2 monitor.

1.Select the multiscreen monitor by pressing the [MULTI- SCREEN] button repeatedly.

The indicator in the button is on to indicate the multi- screen monitor is selected.

MULTI

SCREEN

51

Image 51
Contents Operating Instructions Lightning flash with arrowhead symbol Important Safety Instructions Contents Preface FeaturesDo not attempt to disassemble the appliance PrecautionsFully charge up the backup battery Do not drop metallic parts through slotsAlarm Indicator Alarm Power Switch Power ON/OFFLock Indicator Lock Alarm Reset Button ResetMultiscreen Monitor Button Multiscreen Camera Number Buttons Camera Preset Position Number Buttons@2Preset Position Button PRE-POSI Spot Monitor Button SpotLeft Left Right Right @7Auto Button Auto #1Setup/Escape Button SET UP/ESC#2Lock Switch Lock OFF/ON @6Direction Buttons UP/DOWN/LEFT/RIGHT$5Line Selection Switch Line SELECT, 2/4 $1Camera Output Connectors Camera OUT$2Camera Input Connectors Camera $4Line Termination Switch TERM., OFF/ON8Data Port DATA, OUT/IN Installing the WV-PB6164 Data Multiplex Boards InstallationTally Output Setting DIP Switch Setting Alarm Output SettingDummy Black Image Setting Mounting into the Rack Shown below is an example of a basic system connection ConnectionsConnection with the Camera Sites Connections for RS-485 type camera RS-232C Connection with the MonitorsConnection with the PC Data portConnection with External Remote Control Switches Connection with Alarm SensorsSpot and Multiscreen Monitor Monitors and DisplaysConnect the time lapse VCR as shown in the example below Connection with the Time Lapse VCRSetup Procedures Displaying the Setup Menu Setup MenuSetup Menu Programming Setup MenuAlarm Setup Alarm RecallAlarm Schedule Alarm Display on the Monitors Camera Site AlarmVideo Loss Alarm Camera Switching Pulse Loss AlarmDwell Time for Alarm Sequence Alarm Mode on the Multiscreen MonitorAlarm Mode on the Spot Monitor Alarm Recording ModeStill Display Multiscreen Output SetupCamera Title Display Clock DisplayCamera Display Position Setting Sequence ModeSecret View Spot Output Setup Clock Display Record or Multiscreen 2 Output SetupRecord Output Setup Camera Title DisplayRecording Mode Setup Recording Mode Setting DetailsDynamic Recording Multiscreen 2 Output Setup Camera Display Position Sequence ModeSystem Setup Clock SetupClock Display Position Spot Sequence SEQ1 Camera Title SetupSequence Setup Camera Title Display PositionDwell Time Uniform Dwell Time Preset PositionAuto Skip Image AssignmentMulti Sequence SEQ2, SEQ3 Camera/PlaybackDwell Time Programming Steps 2 to Lock ModeSequence Timing Multiscreen Monitor Sequence Timing Spot MonitorCable Compensation/VD2/Data Alarm Terminal SetupCommunication Port Setup Playback ModeData Mode RS-232C ModeDaisy Mode VCR Input SelectUnit Address Password Registration PasswordOther Setup Menus Camera DownloadCamera Upload All Reset Operating Procedures Single Spot Live Controlling the Video Input and MonitorsSelecting the Spot Monitor Single Sequence LiveFreezing Single Spot Live Selecting the Multiscreen MonitorControlling the Camera Images Single Spot LiveZooming Single Spot Live Multiscreen Spot LiveFreezing Multiscreen Spot Live Single or Multi Sequence Live Controlling the Playback ImagesFreezing Single Spot Playback Single Spot PlaybackSingle or Multi Sequence Playback Zooming Single Spot PlaybackMultiscreen Spot Playback Freezing Multiscreen Spot PlaybackMultiscreen Spot Live Images with a Playback Image Displaying the Camera and Playback ImagesFreezing Multiscreen Spot Live Images with a Playback Image Lens Control Controlling Camera Site AccessoriesCamera Control Function Camera SelectionPan/Tilt Control Auto Panning Pan/Tilt Control Preset OperationCamera Setup Pan/Tilt Control Home PositionSimplified preset position setting Alarm Control Function Alarm InputAlarm Operation Spot Output Multiscreen OutputExample of Using Multiscreen 2 Monitor Alarm ResetReset Spot Alarm SuspensionCamera Switching Pulse Loss Display Other FunctionRecording on the Time Lapse VCR Operating Procedures with WV-CU550C Major Operating Controls and Their Functions System Controller WV-CU550C5Preset Position Button PRE-POSI Busy Indicator BusySet Up button SET UP D Time Lapse Mode Buttons T/L MODE, D C@6Mode Selection switch Mode @2Alarm Reset button Reset@4Termination switch TERM., ON/OFF @5Controller Unit Number switch Controller Unit noInstallations Modifying the Front PanelConnection with the WV-CU550C System Controller WJ-FS616C WV-CU550C Function Setup Menu Operations with WV-CU550CControlling the Video Input and Monitors Function Operations with WV-CU550CCamera Control Function RES A.RES Auxiliary Control Alarm Control FunctionSystem Expansion Application Operating ProcedureConnections Other ApplicationsFor Main Site For Local SiteCommunication Protocol Transmission CommandResponse Command AppendixTransmission Response Parameter Ascii Command Ascii Command TableTable below 19 kinds None QOPResponse Command Ascii Main Unit Information Standard Accessories SpecificationsPanasonic Canada Inc