@6Direction Buttons (UP/DOWN/LEFT/RIGHT)
These buttons are used to manually operate the Pan/Tilt Head, move the cursor position in the setup menu of the video multiplexer, or to select an area for Electric Zooming.
UP:Upward
DOWN: Downward
LEFT: Left
RIGHT: Right
@7Auto Button (AUTO)
This button is used to activate the auto panning function if the camera is equipped with the specific future.
@8Iris Buttons (IRIS, CLOSE/OPEN)
Close or open the lens iris of cameras equipped with the specified lens.
When these buttons are pressed at the same time, the lens iris is reset to the factory default settings.
@9Focus Buttons (FOCUS, NEAR/FAR)
Adjusts the lens focus of cameras equipped with the specified lens.
When these buttons are pressed at the same time, the lens focus is automatically set if the camera is equipped with the specific future.
#0Zoom Buttons (ZOOM, TELE/WIDE)
Adjusts the lens zoom of cameras equipped with the specified lens.
#1Setup/Escape Button (SET UP/ESC)
This button is used in the video multiplexer’s setup operation. Pressing this button for two seconds or more will open or close the video multiplexer’s setup menu on the monitor screen.
While the setup menu is displayed on the monitor screen, press this button to execute the currently selected setting and return to the previous setup menu.
#2Lock Switch (LOCK OFF/ON)
This switch can be used to lock out operation of the video multiplexer panel controls.
While this switch is in ON position, control from the video multiplexer is disabled.
#3VCR Control Buttons
These buttons are used for remote control of the VCR that is connected to the video multiplexer.
The buttons function as shown below.
/ |
|
| : | Rewind |
|
|
| : | Pause |
|
|
| ||
|
|
| ||
/ | : | Fast Forward | ||
|
|
| : | Reverse Play |
|
|
| : | Stop |
|
|
| ||
|
|
| ||
|
|
| : | Play |
|
|
| : | Decreases recording duration |
|
|
| : | Increases recording duration |
|
|
| : | Record |
9