Panasonic WJ-FS616C manual Selecting the Multiscreen Monitor, Controlling the Camera Images

Page 49

Controlling the Multiscreen Monitor

The operations described below are available on the multi- screen monitor.

Note: We recommend using the spot monitor in single spot for preventing image disturbance when displaying non- interlace images.

Selecting the Multiscreen Monitor

1.Select the multiscreen monitor by pressing the [MULTI- SCREEN] button repeatedly.

The indicator in the button is on to indicate the multi- screen monitor is selected.

MULTI

SCREEN

Note: The indicator in the button blinks to indicate the multi- screen 2 monitor is selected, if applicable.

2.Press the [VCR/CAM] button will toggle the indicator in the button on and off.

VCR

CAM

Off: Indicates camera images (Live Mode) is selected.

On: Indicates playback images (VCR Mode) is select- ed.

3.In this condition, select the images to be displayed on the monitor screen followed the procedure shown below.

Controlling the Camera Images

While the VCR/CAM button is off, the camera images on the monitor can be controlled followed the procedure described below.

Single Spot (Live)

1.Select an image to be displayed on the monitor by pressing a [1 – 16] button.

The indicator in the selected button lights and the cam- era image corresponding to the button appears on the monitor screen.

2

2.To select another image, press a [1 – 16] button corre- sponding to the image.

The selected image appears on the monitor screen. The indicator in the button previously selected turns off and the indicator in the button currently selected lights.

Freezing Single Spot (Live)

While the image on the monitor screen is displayed in sin- gle spot mode, the image can be frozen followed the pro- cedure below.

1.Select an image to be frozen on the monitor by press- ing a [1 – 16] button.

The indicator in the selected button lights and the cam- era image corresponding to the button appears on the monitor screen.

2

2.Press the [STILL] button to display the freeze image on the monitor.

The indicator in the STILL button lights and the indicator in the pressed CAMERA button starts to blink.

STILL

STILL

49

Image 49
Contents Operating Instructions Lightning flash with arrowhead symbol Important Safety Instructions Contents Preface FeaturesFully charge up the backup battery PrecautionsDo not drop metallic parts through slots Do not attempt to disassemble the applianceLock Indicator Lock Power Switch Power ON/OFFAlarm Reset Button Reset Alarm Indicator Alarm@2Preset Position Button PRE-POSI Camera Number Buttons Camera Preset Position Number ButtonsSpot Monitor Button Spot Multiscreen Monitor Button Multiscreen#2Lock Switch Lock OFF/ON #1Setup/Escape Button SET UP/ESC@6Direction Buttons UP/DOWN/LEFT/RIGHT Left Left Right Right @7Auto Button Auto$2Camera Input Connectors Camera $1Camera Output Connectors Camera OUT$4Line Termination Switch TERM., OFF/ON $5Line Selection Switch Line SELECT, 2/48Data Port DATA, OUT/IN Installing the WV-PB6164 Data Multiplex Boards InstallationTally Output Setting Alarm Output Setting DIP Switch SettingDummy Black Image Setting Mounting into the Rack Shown below is an example of a basic system connection ConnectionsConnection with the Camera Sites Connections for RS-485 type camera Connection with the PC Connection with the MonitorsData port RS-232CConnection with External Remote Control Switches Connection with Alarm SensorsSpot and Multiscreen Monitor Monitors and DisplaysConnect the time lapse VCR as shown in the example below Connection with the Time Lapse VCRSetup Procedures Displaying the Setup Menu Setup MenuSetup Menu Programming Setup MenuAlarm Recall Alarm SetupAlarm Schedule Video Loss Alarm Camera Site AlarmCamera Switching Pulse Loss Alarm Alarm Display on the MonitorsAlarm Mode on the Spot Monitor Alarm Mode on the Multiscreen MonitorAlarm Recording Mode Dwell Time for Alarm SequenceCamera Title Display Multiscreen Output SetupClock Display Still DisplaySequence Mode Camera Display Position SettingSecret View Spot Output Setup Record Output Setup Record or Multiscreen 2 Output SetupCamera Title Display Clock DisplayRecording Mode Setting Details Recording Mode SetupDynamic Recording Multiscreen 2 Output Setup Camera Display Position Sequence ModeClock Setup System SetupClock Display Position Sequence Setup Camera Title SetupCamera Title Display Position Spot Sequence SEQ1Auto Skip Preset PositionImage Assignment Dwell Time Uniform Dwell TimeCamera/Playback Multi Sequence SEQ2, SEQ3Dwell Time Sequence Timing Multiscreen Monitor Lock ModeSequence Timing Spot Monitor Programming Steps 2 toCable Compensation/VD2/Data Alarm Terminal SetupData Mode Playback ModeRS-232C Mode Communication Port SetupVCR Input Select Daisy ModeUnit Address Password Registration PasswordCamera Download Other Setup MenusCamera Upload All Reset Operating Procedures Selecting the Spot Monitor Controlling the Video Input and MonitorsSingle Sequence Live Single Spot LiveControlling the Camera Images Selecting the Multiscreen MonitorSingle Spot Live Freezing Single Spot LiveMultiscreen Spot Live Zooming Single Spot LiveFreezing Multiscreen Spot Live Single or Multi Sequence Live Controlling the Playback ImagesFreezing Single Spot Playback Single Spot PlaybackMultiscreen Spot Playback Zooming Single Spot PlaybackFreezing Multiscreen Spot Playback Single or Multi Sequence PlaybackMultiscreen Spot Live Images with a Playback Image Displaying the Camera and Playback ImagesFreezing Multiscreen Spot Live Images with a Playback Image Camera Control Function Controlling Camera Site AccessoriesCamera Selection Lens ControlCamera Setup Pan/Tilt Control Preset OperationPan/Tilt Control Home Position Pan/Tilt Control Auto PanningSimplified preset position setting Alarm Input Alarm Control FunctionAlarm Operation Spot Output Multiscreen OutputExample of Using Multiscreen 2 Monitor Alarm ResetReset Spot Alarm SuspensionOther Function Camera Switching Pulse Loss DisplayRecording on the Time Lapse VCR Operating Procedures with WV-CU550C Major Operating Controls and Their Functions System Controller WV-CU550CSet Up button SET UP D Busy Indicator BusyTime Lapse Mode Buttons T/L MODE, D C 5Preset Position Button PRE-POSI@4Termination switch TERM., ON/OFF @2Alarm Reset button Reset@5Controller Unit Number switch Controller Unit no @6Mode Selection switch ModeModifying the Front Panel InstallationsConnection with the WV-CU550C System Controller WJ-FS616C WV-CU550C Function Setup Menu Operations with WV-CU550CControlling the Video Input and Monitors Function Operations with WV-CU550CCamera Control Function RES A.RES Auxiliary Control Alarm Control FunctionSystem Expansion Connections Operating ProcedureOther Applications ApplicationFor Main Site For Local SiteResponse Command Transmission CommandAppendix Communication ProtocolTransmission Response Parameter Ascii Command Ascii Command TableTable below 19 kinds None QOPResponse Command Ascii Main Unit Information Standard Accessories SpecificationsPanasonic Canada Inc