Panasonic WJ-FS616C manual Camera Control Function, Camera Selection, Lens Control

Page 56

CAMERA CONTROL FUNCTION

The camera control is only available while the camera image is displayed in single spot on the selected monitor screen and the LOCK switch is in OFF position.

Camera Selection

1.Select an either spot or multiscreen monitor by pressing the [SPOT] or [MULTISCREEN] button.

The indicator in the selected button is on.

MULTI

SPOTSCREEN

2.Select the live camera mode (indicator off) by pressing the [VCR/CAM] button.

VCR

CAM

3.Select a camera image you want control by pressing a [1 – 16] button

The indicator in the selected button lights and the cam- era image corresponding to the button appears on the monitor screen.

Controlling Camera Site Accessories

For controlling camera site accessories, normally combina- tion camera equipped with the specific feature or a speci- fied receiver are required to utilize these functions.

Lens Control

Confirm that the specified lens with power zoom/focus func- tions is mounted on the camera.

1.Select the desired monitor and camera referring to the Camera Selection procedure described above.

2.Press the [FOCUS NEAR/FAR] button to adjust the lens focus to achieve a sharply focused image while observ- ing the active monitor.

FOCUS

NEAR FAR

Pressing both of these buttons simultaneously will auto- matically set the lens focus, if the specified camera with auto focus feature is used.

3.Press the [ZOOM] button to adjust the lens zoom to achieve the desired image while observing the active monitor.

Press the [TELE] button to optically bring an object closer.

Pressing the [WIDE] button has the reverse effect.

ZOOM

TELE WIDE

4.Press the [IRIS CLOSE/OPEN] buttons to close/open the lens iris. Adjust the lens iris by pressing these but- tons to obtain the proper image exposure.

I R I S

CLOSE OPEN

Pressing these buttons at the same time will reset the lens iris to the factory default setting.

Pan/Tilt Control (Manual Operation)

1.Select the desired monitor and camera referring to the Camera Selection procedure described above.

2.Press the Direction buttons to move the pan/tilt head in the desired direction.

Pressing the D and B buttons will move the pan/tilt head upwards and to the right.

UP

LEFT HOME/SET RIGHT

DOWN

Note: To move the pan/tilt head faster, press the [HOME/SET] button while holding down the Direction buttons.

56

Image 56
Contents Operating Instructions Lightning flash with arrowhead symbol Important Safety Instructions Contents Features PrefacePrecautions Fully charge up the backup batteryDo not drop metallic parts through slots Do not attempt to disassemble the appliancePower Switch Power ON/OFF Lock Indicator LockAlarm Reset Button Reset Alarm Indicator AlarmCamera Number Buttons Camera Preset Position Number Buttons @2Preset Position Button PRE-POSISpot Monitor Button Spot Multiscreen Monitor Button Multiscreen#1Setup/Escape Button SET UP/ESC #2Lock Switch Lock OFF/ON@6Direction Buttons UP/DOWN/LEFT/RIGHT Left Left Right Right @7Auto Button Auto$1Camera Output Connectors Camera OUT $2Camera Input Connectors Camera$4Line Termination Switch TERM., OFF/ON $5Line Selection Switch Line SELECT, 2/48Data Port DATA, OUT/IN Installation Installing the WV-PB6164 Data Multiplex BoardsTally Output Setting Dummy Black Image Setting DIP Switch SettingAlarm Output Setting Mounting into the Rack Connections Shown below is an example of a basic system connectionConnection with the Camera Sites Connections for RS-485 type camera Connection with the Monitors Connection with the PCData port RS-232CConnection with Alarm Sensors Connection with External Remote Control SwitchesMonitors and Displays Spot and Multiscreen MonitorConnection with the Time Lapse VCR Connect the time lapse VCR as shown in the example belowSetup Procedures Setup Menu Displaying the Setup MenuProgramming Setup Menu Setup MenuAlarm Schedule Alarm SetupAlarm Recall Camera Site Alarm Video Loss AlarmCamera Switching Pulse Loss Alarm Alarm Display on the MonitorsAlarm Mode on the Multiscreen Monitor Alarm Mode on the Spot MonitorAlarm Recording Mode Dwell Time for Alarm SequenceMultiscreen Output Setup Camera Title DisplayClock Display Still DisplaySecret View Camera Display Position SettingSequence Mode Spot Output Setup Record or Multiscreen 2 Output Setup Record Output SetupCamera Title Display Clock DisplayDynamic Recording Recording Mode SetupRecording Mode Setting Details Multiscreen 2 Output Setup Sequence Mode Camera Display PositionClock Display Position System SetupClock Setup Camera Title Setup Sequence SetupCamera Title Display Position Spot Sequence SEQ1Preset Position Auto SkipImage Assignment Dwell Time Uniform Dwell TimeDwell Time Multi Sequence SEQ2, SEQ3Camera/Playback Lock Mode Sequence Timing Multiscreen MonitorSequence Timing Spot Monitor Programming Steps 2 toAlarm Terminal Setup Cable Compensation/VD2/DataPlayback Mode Data ModeRS-232C Mode Communication Port SetupUnit Address Daisy ModeVCR Input Select Password Password RegistrationCamera Upload Other Setup MenusCamera Download All Reset Operating Procedures Controlling the Video Input and Monitors Selecting the Spot MonitorSingle Sequence Live Single Spot LiveSelecting the Multiscreen Monitor Controlling the Camera ImagesSingle Spot Live Freezing Single Spot LiveFreezing Multiscreen Spot Live Zooming Single Spot LiveMultiscreen Spot Live Controlling the Playback Images Single or Multi Sequence LiveSingle Spot Playback Freezing Single Spot PlaybackZooming Single Spot Playback Multiscreen Spot PlaybackFreezing Multiscreen Spot Playback Single or Multi Sequence PlaybackDisplaying the Camera and Playback Images Multiscreen Spot Live Images with a Playback ImageFreezing Multiscreen Spot Live Images with a Playback Image Controlling Camera Site Accessories Camera Control FunctionCamera Selection Lens ControlPan/Tilt Control Preset Operation Camera SetupPan/Tilt Control Home Position Pan/Tilt Control Auto PanningSimplified preset position setting Alarm Operation Alarm Control FunctionAlarm Input Multiscreen Output Spot OutputAlarm Reset Example of Using Multiscreen 2 MonitorAlarm Suspension Reset SpotRecording on the Time Lapse VCR Camera Switching Pulse Loss DisplayOther Function Operating Procedures with WV-CU550C System Controller WV-CU550C Major Operating Controls and Their FunctionsBusy Indicator Busy Set Up button SET UP DTime Lapse Mode Buttons T/L MODE, D C 5Preset Position Button PRE-POSI@2Alarm Reset button Reset @4Termination switch TERM., ON/OFF@5Controller Unit Number switch Controller Unit no @6Mode Selection switch ModeConnection with the WV-CU550C System Controller InstallationsModifying the Front Panel Setup Menu Operations with WV-CU550C WJ-FS616C WV-CU550C FunctionFunction Operations with WV-CU550C Controlling the Video Input and MonitorsCamera Control Function RES A.RES Alarm Control Function Auxiliary ControlSystem Expansion Operating Procedure ConnectionsOther Applications ApplicationFor Local Site For Main SiteTransmission Command Response CommandAppendix Communication ProtocolCommand Table Transmission Response Parameter Ascii Command AsciiQOP Table below 19 kinds NoneResponse Command Ascii Main Unit Information Specifications Standard AccessoriesPanasonic Canada Inc