SYSTEM SETUP
The procedure described below let you determine the sys- tem designation and display the system status.
ALARM SETUP *
MULTI OUTPUT SETUP *
SPOT OUTPUT SETUP *
REC/MULTI2 REC OUTPUT *
SYSTEM SETUP *
CAM DOWNLOAD NO
CAM UPLOAD NO
ALL RESET SELECT *
1.Move the cursor to SYSTEM SETUP in the SETUP MENU and then press the [HOME/SET button.
The SYSTEM SETUP menu as shown in the figure appears on the monitor screen.
SYSTEM SETUP | 1 OF 2 | |
CLOCK SETUP | JAN | 1.97 0:00 |
CLOCK POSITION * |
| |
TITLE SETUP * |
|
|
TITLE POSITION * |
| |
SEQUENCE SETUP SEQ1 * | ||
SEQ | ||
SEQ |
| |
LOCK MODE | ALL |
|
|
| |
|
| |
SYSTEM SETUP | 2 OF 2 | |
CABLE COMP/VD2/DATA SETUP * | ||
ALM TERMINAL SETUP | * | |
PLAYBACK MODE | FIELD | |
DATA MODE | CU |
|
VCR |
| |
COM PORT SETUP | * |
|
VCR IN SELECT | VIDEO | |
DAISY MODE | OFF |
|
UNIT ADDR.SET | 1 |
|
PASSWORD | OFF |
|
|
|
|
2.Press the [FUNCTION] button to display the next page of the menu. Press this button again to return to the pre- vious page of the menu.
■Clock Setup
This item lets you set the current time and date.
1.Move the cursor to CLOCK SETUP in the SYSTEM SETUP menu and then press the [HOME/SET] button. The cursor moves to the right editing area.
2.Select the month by pressing the A or B button.
3.Move the cursor to the right by pressing the C or D button, then select the date by pressing the A or B button.
4.Select the last 2 digits for the year and time (military time) as similarly by pressing the C or D button and the A or B button.
5.After completing the setting, press the [SET UP/ESC] button to move the cursor to CLOCK SETUP.
The selected time and date are updated when the [SET UP/ESC] button is pressed.
■Clock Display Position
This item lets you select the position where the clock will be displayed on the monitor screen.
1.Move the cursor to CLOCK POSITION in the SYSTEM SETUP menu and then press the [HOME/SET] button. The position setting menu shown in the figure appears on the monitor screen.
DEC11.96 12:00:00
CAMTITLE
2.Move the clock position by pressing the C, D, A or B button.
Note: In the multiscreen display with the multiscreen output or record output, the clock display is shifted one line from the preset position if the camera title and the clock are preset to the same position.
3.Press the [SET UP/ESC] button to execute the selection and return to the previous SYSTEM SETUP menu.
36