@2Defroster/Auxiliary 2 button (DEF/AUX 2)
Activates the housing defroster of cameras provided with this feature. Pressing this button in the shift mode will turn on the AUX 2 function controlling accessories connected to the cameras or the system.
The LED next to the button is lit while the defroster or AUX 2 function operates.
@3Wiper/Auxiliary 1 button (WIPER/AUX 1)
Activates the housing wiper of cameras provided with this feature. Pressing this button in the shift mode will turn on the AUX 1 function controlling accessories con- nected to the cameras or the system.
The LED next to the button is lit while the wiper or AUX 1 function operates.
@4Patrol Play/Patrol Learn button (PATROL PLAY/
PATROL LEARN)
Starts the camera patrol play. While holding down the Programme/Camera setup/Camera Function button, pressing this button will start to programme the camera patrol learning.
@5Alarm Suspend button (ALM SUSPEND)
Suspends or allows the alarm process.
The LED next to the button is lit while the alarm suspen- sion mode operates.
@6Alarm Reset/Alarm Recall button (ALM RESET/ALM
RECALL)
Resets system alarm when the alarm function is active. Pressing this button in the SHIFT mode will recall the alarm logs (record of alarms activated in the past). Select a monitor, and then press this button to display the alarm logs on the monitor screen. Pressing this but- ton after pressing the shift button again will cancel the function.
The LED next to the button is lit while Alarm Recall mode is activated.
@7Multiscreen Selection button (MULTI SCREEN
SELECT)
Selects the number of segments into which the multi- screen is split on the selected monitor connected to the MULTISCREEN OUT terminal of the Video Multiplexer.
@8VCR/Camera Selection button ( 
VCR/ 
CAM)
Changes the display on the multiscreen monitor between the live picture of a camera and the playback picture of a recording device. The LED next to the but- ton is lit while VCR is selected.
@9Electronic Zoom/Increment button (EL-ZOOM/+)
Zooms the camera picture or VCR playback picture dis- played on the multiscreen monitor.
Pressing this button in the shift mode will move the camera sequence one step forward from the step previ- ously paused while a system unit provided with SEQ PAUSE (e.g., a Video Multiplexer) is selected.
Pressing this button in the shift mode will select the pic- ture of camera with the next higher number for display on the monitor while a system unit connected with cam- eras (e.g., a Data Multiplex Unit) is selected.
The LED next to the button is lit while Electronic Zoom mode is selected.
#0Still/Decrement button (STILL/–)
Freezes the camera picture or VCR playback picture on the multiscreen monitor.
Pressing this button in the shift mode will move the camera sequence one step backward from the step previously paused while a system unit (e.g., a Video Multiplexer) provided with SEQ PAUSE is selected.
Pressing this button in the shift mode will select the pic- ture of the camera with the next lower number for dis- play on the monitor while a system unit connected with cameras (e.g., a Data Multiplex Unit) is selected.
The LED next to the button is lit while a still picture is displayed.
#1Sequence/Patrol Stop button (SEQUENCE/PATROL
STOP)
Runs or stops a preset sequence in which a series of camera pictures is displayed in succession on the mon- itor screen for the specified duration. Pressing it while holding down the Programme/Camera Setup/Camera Function button will stop programming of camera patrol learning.
The LED next to the button is lit while a sequence runs.
#2Sequence Pause/Slow button (SEQ PAUSE/SLOW)
Pauses a sequence running on the selected monitor. In this mode, a series of camera pictures is displayed in pause on the monitor screen for the specified duration. Pressing this button while moving the joystick controller will decrease the pan/tilt speed.
12