Panasonic WV-CU360C manual Monitor Selection, Camera Selection

■Monitor Selection

A monitor is selected when multiple monitors are connected to a system unit (e.g., a Video Multiplexer) to control such functions as multiscreen display and electronic zoom.

1.Select the system unit connected to the monitor you wish to control.

2.Enter a monitor number using the numeric buttons.

MONCAM

ESC LOGOUT SET

3.Press the MON/ESC button.

MON

ESC

The selected monitor number appears in the monitor section of the LED display.

The selected camera number appears in the camera section of the LED display.

The monitor is now ready for control from the system controller.

Notes:

•To confirm the selected monitor number, simply take procedure 3 when the unit address appears in the monitor section of the LED display.

•Each time the MON/ESC button is pressed, the unit number and monitor number are displayed alter- nately on the LED.

•The setting is invalid if the unit in which the monitor number has been set is not programmed.

•In the above case, repeat the same procedure after confirming the monitor number. If you do not know the monitor number, consult the administrator.

•When [--] appears in the monitor section of the LED display, the selected system unit is not compatible with the monitor selection.

•For further information, refer to the Operating Inst- ructions for the system unit concerned.

■Camera Selection

One of the cameras connected to the system unit is select- ed.

1.Select a system unit connected to the camera whose picture you wish to view.

2.Enter a camera number using the numeric buttons.

The entered camera number appears on the LED dis- play.

3.Press the CAM/SET button.

MONCAM

ESC LOGOUT SET

Note: [--] appears in the camera section of the LED dis- play when an alarm is activated, when the multi- screen is displayed, or when a sequence mode is running.

The following functions are available after selecting a cam- era.

•Pan/tilt

•Focus

•Zoom

•Iris

•Defroster ON/OFF (camera housing)

•Wiper ON/OFF (camera housing)

•Preset Position (Combination Camera)

•Home position (Combination Camera)

•Switching between color and B/W picture (Combination Camera)

•Auto pan (Combination Camera)

•Patrol Learn function (Combination Camera)

•Camera functions (Combination Camera)

The selected camera number can be incremented or decremented by one if the system unit is equipped with the camera switching feature.

1.Press the SHIFT button to turn the shift indicator on.

2.Press the EL-ZOOM/+button to increment or the STILL/– button to decrement the camera number.

25