Panasonic WV-CU360C manual Remote Setup of Units & Cameras, Camera Setup, System Unit Setup

REMOTE SETUP of UNITS & CAMERAS

You can set up the system unit and the camera with the setup menu by this controller.

You can use the controller to set up system units and cam- eras.

This section describes the main remote setup procedures. Some of the descriptions may not be applicable if they refer to devices not equipped in your system.

■Camera Setup

1.Select the desired camera.

2.Press the CAM SETUP/CAM FUNCTION button for 2 seconds or more to access the Camera Setup menu. The CAM SETUP indicator lights up.

For further information on the default settings and operating procedures, refer to the Operating Instructions included with the individual units.

■	System Unit Setup
1.	Select the desired system unit compatible with PS • Data
	mode.

CAM SETUP

CAM FUNCTION

(Example of Camera Setup menu)

*** SET UP MENU ***

PRESET	1*
MAP		15
HOME POSITION
SELF RETURN		10MIN
AUTO MODE		AUTO PAN
AUTO PAN KEY		SEQ
DIGITAL FLIP		OFF
LOCAL/REMOTE		LOCAL
SPECIAL1
CAMERA
RS485 SET UP

2. Press the SETUP/FUNCTION button for more than 2

seconds. The SETUP indicator lights up.

The Setup menu for the system unit appears on the

monitor.

		Example of Setup Menu for WJ-MP204C
	SETUP
			WJ-MP204C SETUP MENU x.xx
				COMMUNICATION
				SYSTEM
FUNCTION

3.To complete the setup, press the SETUP/FUNCTION button for 2 seconds or more.

The SETUP indicator goes off.

Note: If you change the default baud rate or parity check, the system unit setup function is disabled.

Keys used for system unit setup

		UP
L	R L	R	To move the cursor.

DOWN

STILL EL-ZOOM

To select a parameter.

–+

CAM

To execute the parameter or enter a submenu

SET

MON

To return to the previous menu

ESC

3.Move the cursor with the numeric buttons 2 (Up) or 8 (Down), then select a parameter with the buttons 6 (Right) or 4 (Left).

MONCAM

ESC LOGOUT SET

4.Press the CAM/SET button to execute the parameter or enter a submenu.

MONCAM

ESC LOGOUT SET

5.To return to the previous menu, press the MON/ESC button.

6.Press the CAM SETUP/CAM FUNCTION button for 2 seconds or more to complete the camera setup.

35