■Video Multiplexer Control
Some of the major functions equipped in a Video Multiplexer are remotely controlled from the System Controller. For more information, refer to the manual includ- ed with the Video Multiplexer.
The operating procedures on the following pages assume that you have selected a system unit and a monitor.
●Multiscreen Selection
1.Press the MULTISCREEN SELECT button. The select- ed multiscreen monitor displays a split screen.
|
| Example of Quad Picture |
MULTI SCREEN SELECT | 1 | 2 |
3 | 4 |
2.Press the button repeatedly to select the number of segments you wish the multiscreen to display. Each time the button is pressed, the number changes as fol- lows depending on the number of inputs (16 or 9).
9 → | 16 → 4 screen segments | |
9 → | 4 screen segments |
●Still Picture
There are two ways of displaying still pictures on the multi- screen monitor.
8Specific camera still
1.Select a camera number using the numeric buttons, then press the STILL/– button. The selected camera picture freezes on the multiscreen while the STILL/– indicator is lit.
STILL
8All cameras still
1.Enter 0 with the numeric buttons, then press the STILL/– button. All camera pictures freeze on the mul- tiscreen while the STILL/– indicator is lit.
STILL
0
–
2.Press the STILL/– button to cancel the still display mode.
●Electronic Zoom
A picture displayed on the monitor can be electronically zoomed in, and the enlarged area in the picture can be moved using the joystick.
1.Press the
+
2.Move the [+] mark into the zoom area moving the joy- stick.
UP
LR
DOWN
3. Press the
–
2. Press the STILL/– button to cancel still display mode.
You can move the enlarged area on the monitor using the joystick.
4. Press the
29