Panasonic WV-CU360C manual Operating Procedures For WJ-FS616/FS616C System, AUX Control

Page 48

OPERATING PROCEDURES (For WJ-FS616/FS616C System)

Note: For common operations to the controller and the WJ-FS616/FS616C, please refer to the manual included with the WJ-FS616/FS616C. The following pages describe only operations different from the WJ-FS616/FS616C.

■Camera Selection

One of the cameras connected to the system unit is select- ed.

1.Enter a camera number using the numeric buttons. The number appears on the LED display.

2.Press the CAM/SET button.

CAM

SET

UNITCAM

ESCSET

Note: [--] appears in the camera section of the LED dis- play when an alarm is activated, when the multi- screen is displayed, or when sequence mode is run.

The following functions of the camera are controlled.

•Pan/tilt

•Focus

•Zoom

•Iris

•Defroster ON/OFF (camera housing)

•Wiper ON/OFF (camera housing)

•Preset Position (Combination Camera)

•Home position (Combination Camera)

•Auto pan (Combination Camera)

■Camera Control

Cameras and their peripherals are controlled from the WV- CU360C as follows. Some of the descriptions may not be applicable if they refer to devices not equipped in your sys- tem.

●Pan/Tilt Control

Proceed as follows to control an ordinary camera mounted on a pan/tilt head or a combination camera in manual or automatic panning mode.

1.Move the pan/tilt head in the desired direction with the joystick controller.

UP

LR

DOWN

2.Press the AUTO/+ button to activate a preset auto pan- ning.

●AUX Control

This allows you to control an auxiliary device such as a buzzer or lamp connected to the Receiver or combination camera.

8Auxiliary 1/2

1.Press the ALT button to turn on the ALT indicator .

The following additional functions can be controlled when using the WV-CS854 or later camera models.

• Switching between color and B/W picture

(Combination Camera)

ALT

AUTO/+

AUX 2

• Patrol Learn function (Combination Camera)

• Camera functions (Combination Camera)

HOME/-

AUX 1

2.Press the AUX 1 or AUX 2 button to operate or cancel the auxiliary function for the selected camera.

49

Image 48

Contents Operating Instructions 360CEnglish Version Important Safety Instructions Contents Handle the appliance with care Do not use any AC adapter other than the one suppliedController Number Switch Controller No Mode Selection Switches ModeData Ports Data DC 9 V Input Jack DC 9VInstallations Template MountingRear Panel Switch Setting Summary WJ-FS616CPanasonic Security Data PSData Systems Operate indicator Operate Login indicator LoginAlarm indicator Alarm Busy indicator Busy Monitor/Unit indicator MONITOR/ Unit4Home/Preset/Programme Preset button 8Programme/Camera Setup/Camera Function button9Setup/Function button SETUP/FUNCTION Iris buttons IRIS, CLOSE/OPEN@5Alarm Suspend button ALM Suspend @6Alarm Reset/Alarm Recall button ALM RESET/ALM@2Defroster/Auxiliary 2 button DEF/AUX @3Wiper/Auxiliary 1 button WIPER/AUXInstallations PSData System ConnectionsConnection Example Internal Diagram Data Port Connection PS DataBasic Connection DIP Switch Setting PS Data Daisy Chain ConnectionController Number Setting PS Data Mode Switch Setting for System ExampleController Setup Procedures PSData Prior to SetupButtons and Controls used for Setup Setup Menus Administrator Authorization Baud RateParity Wait TimeUser Password Administrator PasswordUser Password Certification Unit a button AssignmentCamera Cleaning Unit Connection TestAvailable camera numbers Operating Procedures PSData Basic Operating FlowLogin/Logout LogLog Out System Unit Selection Selecting with Unit NumberSelecting with Unit A/UNIT B Button Monitor Selection Camera SelectionHome/Preset Position Camera ControlPan/Tilt Control Lens ControlCombination Camera Shortcuts IrisHousing/AUX Control SettingData Multiplex Unit Control Camera SelectionVideo Multiplexer Control Multiscreen SelectionStill Picture Electronic ZoomViewing Playback Sequence ControlDigital Disk Recorder Control WJ-HD100 ShortcutsWJ-HD500A Shortcuts Show/Hide Alarm Log Alarm Log 1 line UpAlarm Log 1 line Down Playback of Selected Alarm Alarm LogAlarm Operation Alarm ResetAlarm Recall Press the ALM RESET/ALM Recall buttonRemote Setup of Units & Cameras Camera SetupSystem Unit Setup Camera Patrol Learning ProgramCamera Preset Position For WJ-FS616C Multiplexer System Front View Template for WJ-FS616C 8Alarm Reset button ALM Reset @1Alarm Suspend button ALM Suspend0Home/Decrement button Home 1Auto Focus button Auto Focus@5Preset Position button PRE Posi @8Set Up button SET UP ON/OFF@6Still button Still @7Camera Set buttons Camera SET ON/OFFInstallations For WJ-FS616/FS616C WJ-FS616CDIP Switch Setting For Multiplexer Data Port Connection For MultiplexerController Number Setting Switch Setting ProceduresUnit Version WJ-FS616Setup Procedures For WJ-FS616/FS616C Controller Setup COM Port Setup Operating Procedures For WJ-FS616/FS616C System AUX ControlAlarm Suspension VTR VCR ControlGeneral Setup Shortcut for Preset Position SetupFor WJ-SX350 Matrix Switcher System Log-in indicator Login Front View Template for WJ-SX350LED Display Monitor Camera 3Preset Position button Preset POSI/CAM Posi @0Alarm Acknowledgment and Reset button ACK/RESETIris buttons Iris CLOSE/OPEN Focus buttons Focus NEAR/FAR@3All Alarms Reset button ALL Reset @6Alarm Recall button Recall#1Set Up button SET UP @1@2Backward/Forward Sequence button SEQ BACK/FWDInstallations For WJ-SX350 Example below shows a typical system connectionDIP Switch Setting For WJ-SX350 Data Port Connection For WJ-SX350For version 6.00 or later, set the switches as shown below Controller Setup Procedures For WJ-SX350 Setup Procedures Operating Procedures For WJ-SX350 Login & LogoutLens Control Auto Focus Operation Pan/Tilt Control Camera Position OperationCamera Housing Control Pan/Tilt Control Auto/Random PanningAuxiliary Control Wiper controlSystem Status Display For System WJ-SX850 Matrix Switcher System Front View Template for System 850 Matrix Switcher Link indicator Link Camera indicator CameraAlarm indicator Alarm Monitor indicator Monitor3Programme Preset button Program Preset 4Call Preset button Call Preset9Alarm button ALARM, Disarm indicator Disarm @0Alarm Acknowledge button ACK@1Alarm Reset button Reset @2Group Preset button Group Preset@3Previous button Prev @4Next button NextPage Installations For System Sensors System Matrix SwitcherData Port Connection TX B TX a RX B RX aDIP Switch Setting Setup Procedures For System Setup Procedures Operating Procedures For System Turn on the power switches of all system componentsAppendix Specifications ControllerALL Reset Panasonic Canada Inc