Adjusting the Volume
Volume can be controlled from the headphone or your own radio volume function.
1Turn on POWER on the headphone.
2Adjust the volume level by turning clockwise for louder and
Refer to Wireless Headphone (Page 24)
Switching the Source
Front Control Keys
1Press SELECT to change each source.
2Press SELECT to cycle through the different sources.
Remote Control
Press DVD, AUX1 or AUX2 to change each source directly.
•OSD (On Screen Display) will be turned off automatically, when not operating more than 6 seconds.
•To connect the device to AUX1 and AUX2, see page 28.
•When the source is changed, the device remembers the scene where playback stopped.
•The device mode of the remote control is automatically shifted to the assigned device, when AUX1 or AUX2 is pressed.
Selecting the Backlight Brightness
The brightness of the LCD panel’s backlighting is adjustable to more closely match the vehicle’s interior lighting. This makes the screen easier to view.
1Press DIMMER.
2Press DIMMER to cycle through the OSD as AUTO, LOW and HIGH. (Default: HIGH)
For setting Dimmer level, refer to page 15.
Instant Change of Visual EQ
1Press V EQ. on the remote control.
2Press V EQ. to switch to the different mode.
Device Control
Device modes (TV,
AUX1
AUX2
DEVICE BUTTON
(TV,
MEMORY
Memorizing Device Control
You can map the device function on AUX1 and AUX2. Once the device is memorized in the source (AUX1 or AUX2), the remote control will be automatically switched to the memorized device mode at the next time AUX1 or AUX2 is pressed.
1Press AUX1 or AUX2.
2Select one of following devices you want to assign,
3Press MEMORY key to store the device on the source.
•Each step should be made within 6 seconds, otherwise OSD (On Screen Display) will be automatically turned off.
Selecting Source Name from Remote Control
When you proceed the above step with the remote control pointed toward the monitor, the device source name on OSD can be automatically shifted without entering Setup menu.
SOURCE NAME
| 4/8/06 2:17:11 | AM |
|
|
|