Alpine PKG-RSE2 Setting the Source Name, Setting the Auto Level Control, Setting the Screen Modes

Setting the Source Name

3 Press ▲ or ▼ and select SOURCE NAME.

The currently selected

source name

The currently selected

source displays on

Source Name menu

Video Signal menu is

for AUX1 only

DVD:

Source name of DVD can not be changed to other names.

AUX 1:

Press or to select AUX1/EX-DVD/DVD-HU/DVB-T/ ISDB-T/TV/GAME/USER* (Default: AUX1)

AUX 2:

Press or to select AUX2/EX-DVD/DVD-HU/DVB-T/ ISDB-T/TV/GAME/USER* (Default: AUX2)

Customizing Source Name

Your desired OSD source name can be defined up to 6 characters.

4Press or to select USER.

5Press ENTER key. Character setting menu appears.

6Press ▲, ▼, or and ENTER key to select the

character “A-Z”, “0-9”, “-“, space and “.”.

“DEL”:	Delete one character at a time.
“CLR”:	Clear entire characters.
“OK”:	Confi rm source name and exit
	from character setting menu.

•If no key is pressed within 6 seconds, OSD disappears and the source name will not be changed.

Setting the Auto Level Control

Auto Level Control adjusts the sound volume automatically. This function balances sound volume for all sources.

3Press or to turn ON/OFF Auto Level Control. (Default: ON)

Setting the Screen Modes

Display mode on the screen can be adjusted to Wide, Cinema and Normal. (Default: WIDE)

3 Press or to select WIDE/CINEMA/NORMAL

WIDE

Normal images are expanded uniformly in the horizontal direction and are displayed over the entire screen.

CINEMA

Normal images are expanded in the horizontal and vertical directions. The top and bottom of the image are cut off. This mode is suited for 16:9 cinema size images.

NORMAL

Normal image (4:3)

4Wait 6 seconds until OSD disappears; the adjustment will be saved automatically.

Setting the TV System

Broadcast TV System can be manually switched.

3Press or to select AUTO/NTSC/PAL. (Default: AUTO)

Setting the Video Signal

3Press or to select Composite/S-Video. (Default: Composite)

Video Signal selection menu is only available in AUX1 source.

AUX1 must be connected with either Composite cable or S-Video cable. You can not connect both cables at the same time. It may cause noise on the screen.

Refer to System Connection (Page 28)

19-EN

Book_PKG-RSE2.indb 19 4/8/06 2:17:28 AM