Alpine PKG-RSE2 owner manual Playing DVD/Video CD, Stopping Playback PRE-STOP, DVD Auto Play

DVD

The instruction includes Built-In DVD, EXT-DVD, DVD-HD. DVD player can be also used for CD/CD- R/CD-RW.

SELECT MENU ■ ENT

Front Control Keys

DVD Auto Play

The main movie will play automatically without pressing Play or Enter button, when DVD is inserted, if AUTO or SKIP mode is selected on DVD Auto Play under System menu. See page 20 for detail.

If a menu screen appears

On DVDs and video CDs, menu screens may appear automatically, when DVD Auto Play is set to NORMAL. Perform the operation described below to start playback.

•For many discs, the menu screen can also be displayed by pressing MENU.

DVD
EXT-DVD
DVD-HU	MENU
TOP.M
	ENTER
▲▼
DISPLAY	RETURN
REPEAT
	■
number
keys
(0 to 9)	CLEAR*2
	+10*1
	Remote Control

*1 +10 is available for Built-in DVD, EXT-DVD and DVD-HU. *2 CLEAR is available only for Built-in DVD and EXT-DVD.

Playing DVD/Video CD

Caution

•Not all functions will operate for every DVD. See the individual DVD’s instructions for details on the features supported.

•Fingerprints on a disc may adversely affect playback. If a problem occurs, remove the disc and check for fingerprints on the playback side. Clean the disc if necessary.

•When using the remote control, be careful to press one button at time. Pressing multiple buttons at the same time may cause erroneous operation.

•If you switch the power or ignition key OFF during playback, playback will continue where you left off when you resume playback.

•If you try to perform an invalid operation (based on the type

of disc being played), the following mark is displayed on the monitor screen:

•A disc type must match the setting of TV System under Audio & Screen menu. If a wrong type disc is inserted, the message "VIDEO SIGNAL SYSTEM IS NOT CORRECT" is displayed, and playback is not available.

Insert a disc with the label side facing up.

To load discs, see “Loading and Unloading Discs” on page 10. Playback starts.

•The reverse side of a double-sided DVD will not be played automatically. Remove the disc, turn it over, and reinsert it.

•It may take some time before playback starts after loading a disc.

12-EN

DVD menu

Press ▲, ▼, or to select the desired item, then press ENTER.

•For some discs it is possible to select items directly from the menu screen using the number keys (“0” to “9”).

Video CD menu

Use the number keys (“0” to “9”) to select the desired number, then press ENTER.

•The menu screen does not appear when the PBC function is turned off. In this case, set VCD PLAY MODE to turn on the PBC function. For details, Refer to “Setting the Video CD Play Mode” (page 23).

Stopping Playback (PRE-STOP)

Press ■ during playback to stop playback. That position is stored in memory.

1Press ■ during playback. “PRE-STOP” is displayed.

2 Press in the PRE-STOP mode.

Playback starts from the position at which it was stopped.

•For some discs, the position at which playback was stopped may not be accurate.

Stopping Playback

Press ■ twice during playback.

“STOP” is displayed, and playback stops.

•Playback starts from the beginning when is pressed while playback is stopped.

Book_PKG-RSE2.indb 12 4/8/06 2:17:12 AM