System Indication
DISC ERROR
•Mechanism error.
1)Press 
and eject the disc.
If the disc does not eject, press and hold 
for at least 3 seconds and eject the disc.
If the disc still does not eject, consult your Alpine dealer.
2)When the error indication remains after ejecting, press 
again.
If the error indication still does not turn off after pressing 
a few times, consult your Alpine dealer.
•The temperature in the car is too low.
- Raise the temperature in the car to normal temperature.
NO DISC
•No disc is inserted.
-Insert a disc.
•Although a disc is inserted, "NO DISC" is displayed and the unit does not start to play or eject the disc.
-To remove the disc, press and hold 
for at least 3 seconds.
•Remote control operation is not possible.
-For some discs or playing modes, certain operations are not possible. This is not a malfunction.
REGIONAL CODE
VIOLATION
•Disc does not match regional code number.
- Load a disc that matches the regional code number.
LOADING ERROR
EJECT ERROR
•Mechanism error.
1)Press 
and eject the disc.
If the disc does not eject, press and hold 
for at least 3 seconds and eject the disc.
If the disc still does not eject, consult your Alpine dealer.
2)When the error indication remains after ejecting, press 
again.
If the error indication still does not turn off after pressing 
a few times, consult your Alpine dealer.
VIDEO SIGNAL SYSTEM IS
NOT CORRECT
•PAL disc is loaded.
- Load an NTSC disc.
•Protective circuit is activated at high temperature.
-The indicator will disappear when the temperature returns to within operation range.
-Leave the power OFF until the temperature decreases and then turn the power ON again.
33-EN
| 4/8/06 2:17:49 | AM |
|
|
|