Wireless Headphone
Headphone Receivers
1)Infrared Sensors; Receive signal from the transmitter.
2)Battery Cover
3)Volume Control
4)Power Switch
5)Power Indicator LED
Operation
Read carefully to prevent damage to the headphone or your ears:
WARNING: Before turning on the power, remove headphones and turn the volume down as low as possible.
1)Be sure the batteries are properly installed in the headphones.
2)Turn the headphones volume completely down before placing it on your ears and turning on the power.
3)Turn on the headphone power and adjust the headphone volume to a comfortable level (You can increase the audio source volume if needed).
Battery Installation
Place two AAA batteries into the battery compartment of the headphone(s), making sure that the battery polarity is correct.
24-EN
| 4/8/06 2:17:36 | AM |
|
|
|