Alpine PKG-RSE2 Monitor Setup, Adjusting Picture, Adjusting the Brightness, Visual EQ Operation

Monitor Setup

Adjusting Picture

Visual EQ, Brightness, color, tint, contrast and sharpness are adjustable.

•Each source is independently adjustable.

•Make adjustments within 6 seconds, otherwise the OSD (On Screen Display) will turn off automatically.

•After adjusting, the “OFF” setting in Visual EQ changes to “CUSTOM”. After resetting the unit, “CUSTOM” changes back to “OFF”

1Press SETUP button on the remote control.

Or press and hold the SELECT button on the Front Control Keys for at least 2 seconds to open SETUP screen. The PICTURE setting menu is highlighted.

SELECT

Front Control Keys

•“OFF” will change to “CUSTOM”, when any of the picture mode (Brightness, Color, Tint, Contrast and Sharpness) has been adjusted

•NIGHT MOVIE, SOFT, SHARP and HIGH CONT. are fixed values. They cannot be set manually. If the picture mode is changed, they automatically change to CUSTOM mode.

•To return OFF mode, press RESET on the picture mode, or change values of BRIGHT, COLOR, TINT, CONTRAST and SHARPNESS to 0 manually.

3Wait 6 seconds until OSD disappears; the adjustment will be saved automatically.

Adjusting the Brightness

2Press ▲ or ▼ and select BRIGHT.

3Press or to adjust the brightness. Brightness can be adjusted from –15 (MIN) to +15 (MAX).

SETUP

Remote Control

VISUAL EQ Operation

You can select a mode suitable for the subject image.

2To change VISUAL EQ, press or to cycle through the OSD as OFF, NIGHT MOVIE, SOFT, SHARP and HIGH CONT. (Default: OFF)

VISUAL EQ mode (manufacturer’s settings) selection

(VISUAL EQ MODE)

OFF:	Normal Setting (Visual EQ OFF)
NIGHT MOVIE:	Suitable for movies in which dark
	scenes frequently appear.
SOFT:	Suitable for CGs and animated
	fi lms.
SHARP:	Suitable for old movies where
	images are not clearly shown.
HIGH CONT.:	Suitable for recent movies.

4Wait 6 seconds until OSD disappears; the adjustment will be saved automatically.

Adjusting the Color Density

2Press ▲ or ▼ and select COLOR.

3Press or to adjust the color density. Change depth can be adjusted from –15 (MIN) to +15 (MAX).

4Wait 6 seconds until OSD disappears; the adjustment will be saved automatically.

17-EN

Book_PKG-RSE2.indb 17 4/8/06 2:17:24 AM