Setting System Control
IR transmitter, FM transmitter, FM frequency, dimmer and beep can be adjusted for all available sources.
• Once this adjustment is made, all sources are affected.
SELECTENT
Front Control Keys
SETUP
Remote Control
1Press and hold SELECT for at least 2 seconds to show the SETUP menu on Front Control Keys. Or Press SETUP button on Remote Control.
2Press SELECT/SETUP to switch to SYSTEM setting menu from AUDIO&SCREEN setting menu.
Setting the Dimmer
4Press or to select AUTO/LOW/HIGH. (Default: AUTO)
AUTO adjusts the LCD backlight brightness automatically by sensing the ambient light from the luminance sensor.
Setting the Dimmer Low Level
4Press or to select low level of Dimmer between 0 (min.) to 15 (max.). 15 (max.) is the same brightness level with HIGH on Dimmer menu.
Setting the Beep
4Press or to turn on/off beep sound. (Default: ON)
Setting the DVD Auto Play
4Press or to select NORMAL/AUTO/SKIP.
NORMAL: | Stay on the menu until the user input. |
AUTO: | Play movie after 6 seconds on the menu. |
SKIP: | Play movie Immediately. It will skip |
| previews and the menu. |
•This setting is only available before inserting a disc, or when in stop mode.
•To activate SKIP mode, a disc must be ejected and reloaded after setting. (Note: SKIP mode can not be activated, when a disc is inserted or reloaded while Alpine logo is shown on the screen monitor.)
•This function is not available on some discs.
3Press ▲ or ▼ to change each item.
Setting the IR Transmitter
4Press or to select A/B/OFF. (Default: A)
Setting the FM Modulator
4Press or to select FM Radio region (OFF/USA/ EUR/JPN). (Default: OFF)
Setting the FM Frequency
4Press or to select desired FM Radio Frequencies between 88.1 MHz to 92.1 MHz for USA and Europe, and 88.1 MHz to 90.0 MHz for Japan. (Default: 89.1 MHz)
•USA frequency step is 0.2MHz and Europe and Japan is 0.1MHz.
Resetting to the Factory Default
4Press ENTER Key, the system changes to Factory Default System Setting. Entire settings include Picture, Visual EQ, Display Mode are also reset. DVD Setup values will not be affected.
| 4/8/06 2:17:30 | AM |
|
|
|